VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: TylerDurden on August 23, 2013, 10:39:06 am

Title: MK2 rear motor mount - solid to g60/hydro?
Post by: TylerDurden on August 23, 2013, 10:39:06 am

The rear mount under the exhaust, 86 TD...

I have read* about the hydro being taller than the rubber mount. Anyone really, personally tried it, or really measured them?

(https://lh5.googleusercontent.com/-9LQ9LvyZ5fs/UheZEwSmsbI/AAAAAAAABSU/MNt5reoKAPk/s800/mounts.jpg)


My solid is effed, so if I gotta replace it, I'd like to know if the hydro is viable.



*(tylernt tried a hydro and the engine sat jakey/high... conversely, another guy on 'tex tried a solid on his ABA to replace the hydro and it also sat high?)

Title: Re: MK2 rear motor mount - solid to g60/hydro?
Post by: bbob203 on August 23, 2013, 03:23:11 pm

I have one my b3 mtdi it's totally fine I think I used a 1.6 Td rear mount bracket..

Title: Re: MK2 rear motor mount - solid to g60/hydro?
Post by: theman53 on August 23, 2013, 03:52:50 pm

Got the non hydro and love it