VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: 92EcoDiesel Jetta on November 18, 2012, 11:35:23 am

Title: caddy cluster wiring
Post by: 92EcoDiesel Jetta on November 18, 2012, 11:35:23 am

A2resource has a real nice pinout chart of CE1 and CE2 electrical  Is there one for Caddy electrical?

Specifically, does the red/ black wire from the cluster harness connector ((tach signal in a gasser caddy) go down to the fuse block onto the engine bay of a diesel caddy? I could rip everything apart and trace the wire but don't really want to/ have to if such a pinout diagram exist.

Title: Re: caddy cluster wiring
Post by: CRSMP5 on November 18, 2012, 01:28:44 pm

shift light??? 82+ = dynamic oil pressure and shift light... if so yes... if no nope.. you will need to add wire..

Title: Re: caddy cluster wiring
Post by: 92EcoDiesel Jetta on November 18, 2012, 01:41:38 pm

Do you know where the shift light wire go to in rhe fuse block (connector/pin)? 


edit:
The red/black wire is on pin 5 of the cluster harness connector.