VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: vdubspeed on November 15, 2011, 05:19:24 pm

Title: New Unobtanium - NOS cruise control for diesels.
Post by: vdubspeed on November 15, 2011, 05:19:24 pm
Number 1 reason to go to aircooled shows...to score watercooled parts!

Found this MEGA rare NOS cruise control for diesel mk1's. Of notable importance was the Neuspeed steering wheel with hub that was also scored for a song.

I was going to install the cruise but I did a vacuum delete on my 1.6TD. Probably will keep them both around.

Pics or didn't happen.
(http://i36.photobucket.com/albums/e48/vdubspeed16vT/Parts%20for%20sale/CruiseControl.jpg?t=1321406171)
Title: Re: New Unobtanium - NOS cruise control for diesels.
Post by: BigVWman on November 15, 2011, 06:55:52 pm
Yep the air guys don't know what they have when its watercooled and you can score great stuff cheap!
Title: Re: New Unobtanium - NOS cruise control for diesels.
Post by: CRSMP5 on November 15, 2011, 08:11:38 pm
i take cruise from say quantiums, mk2 jetta and even audi 4k and add it into mk1 and such.. easy swap per say.. but you gotta have a speedo with the cut out for the speed sensor..
Title: Re: New Unobtanium - NOS cruise control for diesels.
Post by: larry104 on November 16, 2011, 09:29:05 am
I installed an Audiovox CCS100 cruise control in my '92 Eco. I wired it to a factory cruise control lever and used the included sensor and magnets for the speed signal. A vacuum motor runs off the engine vac pump. It has worked perfectly going on 4 years. Unfortunately, Audiovox stopped selling them. :(
Title: Re: New Unobtanium - NOS cruise control for diesels.
Post by: BigVWman on January 01, 2012, 11:17:11 am
What is something like that cruise kit worth if someone happened to say oh have one laying around? ;D
Title: Re: New Unobtanium - NOS cruise control for diesels.
Post by: ORCoaster on January 01, 2012, 07:20:39 pm
Last cruise I bought was 250 bucks so one so rare should be worth at least that or more.


I would have to replace the lawn mower cable I have attached to the throttle in order to make this one work.