VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: baldone on May 03, 2011, 01:03:32 am

Title: Trubo hot side problem
Post by: baldone on May 03, 2011, 01:03:32 am

Hy!

I have a problem with my turbo hot side...Garrett T2. The wastegate is a total rusted, and not working,i have no pressure ball...  >:( , but i have a wrecked KKK K14 turo with a good hot side! Can I fitted the K14 hot side on the T2 cold side, with the T2 central, or the whole inside of the T2 fitted in the K14 housing??

Title: Re: Trubo hot side problem
Post by: BillyWillicker on May 03, 2011, 09:50:03 am

most likely not without machining of some sort. 

Title: Re: Trubo hot side problem
Post by: R.O.R-2.0 on May 03, 2011, 12:19:42 pm

garrett parts and KKK parts do not fit together like that.. like was stated, you would have to machine the hot side to accept your center section.

Title: Re: Trubo hot side problem
Post by: baldone on May 03, 2011, 08:05:03 pm

Thanks the information! ;)