VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: 92EcoDiesel Jetta on October 16, 2010, 05:29:06 pm
-
I've had the front clip off for 2 months waiting to find an AC condenser that would fit. Finally putting it back together but can't remember where these 2 pieces of plastic trims go. Anyone have a diagram or know where they go?
ps, I've ordered a condenser from German Autoparts and Autohausaz and nither one fits (bottom studs in the wrong place). I could have modifed it but didn't want to screw up a $150 part if I messed up. Finally found a new condenser for $40 shipped and didn't think twice about modifiying it at that price. It's in and fits fine.
(http://i574.photobucket.com/albums/ss184/EcoDiesel/Photo_101610_001.jpg)
-
On each side of the radiator, in front of it.
-
On each side of the radiator, in front of it.
Thanks! Got them back in. I put the top clip back in but forgot to hook up the hood release cable and closed the hood dooh! Any tips getting the hood open? I felt around under there (front grill off) and pushed on the hook and levers with my fingers but it didn't pop.
-
You might be able to get some needle nose pliers in there. Or take off the grill if you can and then get to it.
-
I usually stick a long screwdriver through the grill and press on the release lever.