VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: the4ork on March 16, 2010, 04:29:41 pm

Title: serpentine on the 1.6
Post by: the4ork on March 16, 2010, 04:29:41 pm

(http://i124.photobucket.com/albums/p28/giulianot/mjandcabby037.jpg)

whats the parts list? aaz bracket, waterpump pulley, crank pulley and alternator?

i gotta buy all new ones anyways as ive lost all mine, might as well go serp, easier to change, belt lasts longer, makes less noise ect

Title: Re: serpentine on the 1.6
Post by: the4ork on March 17, 2010, 01:05:06 am

cool just read through that. sounds pretty easy.

one thing i need to figure out is how to get an a/c compressor fitted and working.

i can use the aaz compressor, but then what do i do about the compressor lines, as they are way different than the mk1 lines. i suppose i could use the aaz lines, but i would need an aaz condenser and evaporator, and im not sure if either will fit?  ???

Title: Re: serpentine on the 1.6
Post by: Rabbit on Roids on March 17, 2010, 07:38:19 am

why dont you just use mk3 lines? disconnect the mk2 lines at the firewall and replace.

Title: Re: serpentine on the 1.6
Post by: the4ork on March 17, 2010, 02:04:43 pm

because i have a mk1  8)

Title: Re: serpentine on the 1.6
Post by: tindias on March 19, 2010, 07:45:29 am

Would a G60 crank pulley fit a 1.6?  My current pulley has a wobble and need to replace it.  There are some G60 double pulleys that might line up with my charger better.

Title: Re: serpentine on the 1.6
Post by: theman53 on March 19, 2010, 05:14:21 pm

Quote from: libbybapa on March 17, 2010, 07:15:19 am

If you get the hose ends that fit the compressor, then you can get the hoses made up at almost anywhere that makes custom hoses.

Serious? All I need is a hydraulic hose shop and they can do it? I have that no problem I just thought it was something different. SWEET!