VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: 91jettaidi on February 14, 2010, 02:11:36 pm

Title: How do you unblock wastegate??
Post by: 91jettaidi on February 14, 2010, 02:11:36 pm
Hi guys I had a 91' Jetta TD then I sold it. Now i'm buying the same car back from the guy but he said that he blocked waste-gate and some thing else. I just wanted to know how can i do it. I have know idea where to start if some one can help me out that would be great. Also how long can I drive with a broken rack and pinion.  THANKS
Title: Re: How do you unblock wastegate??
Post by: 91jettaidi on February 14, 2010, 03:18:24 pm
PFFFFT who needs steering, lawl, ok i didn't know it would get that bad thanks for that. I have the part just i tend to spend money on every thing else but that.
Title: Re: How do you unblock wastegate??
Post by: Vincent Waldon on February 14, 2010, 03:23:44 pm
he said that he blocked waste-gate and some thing else. I just wanted to know how can i do it.

There's several ways to block off the wastegate... can he tell you what he did?
Title: Re: How do you unblock wastegate??
Post by: 91jettaidi on February 14, 2010, 04:05:11 pm
He said some thing about a screw
Title: Re: How do you unblock wastegate??
Post by: 91jettaidi on February 14, 2010, 04:09:37 pm
Cause the story is that i have a mint 1990 Jetta 1.8 Gas and i have a 91' Jetta TD and im going to do a swap put the diesel in the gas so i just want to make sure i don't blow the turbo or any thing
Title: Re: How do you unblock wastegate??
Post by: dokarex on February 14, 2010, 05:08:02 pm
Did he block the wastegate or the blow off valve? I think it's a common thing to block of the BOV(search), if you block the wastegate you should be building lot's of boost so check your boost gauge to see if you are.