VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: GEE-BEE on January 24, 2010, 02:57:34 pm
-
I bought two different Coolant hardlines pump to firewall heater hose (AAZ & TDI )from the VWdiesel website for my AAZ 1.9TD
The TDI and the AAZ are interchangeable, the TDI pipe does have a extra mounting tab on the rear
The aaz line from them does have the vw part # on it and Iam not sure if it is old stock ?
I bought both for 20.00 and the aaz model is around 9.00
I did see some rust under the paint of the new assy,so iam going to bead blast and check for additional corrosion and then powder coat when finished.
I was told that a New was about 87.00 from VW , and iam also trying to find the plastic clip part #'s that attach to the hardline to hold the engine wiring harness ?
I need five clips since there not included on the coolant pipe from the dealer or the vwdiesel wesite.
I have purchased some convoluted black slitted tubing for my wires in my engine compartment so I can use the clips to hold my wire loom.( oil psi & oil temp ) gauges .
I would recommend this item only from this website.
Gee-Bee
-
GEE-BEE, I love you man, but I have no idea what you are talking about!
Coolant hard lines, got it. I get confused for a while after that... Something about money.... Rust, bead blast, makes sense... More money... Plastic clip for wiring harness, I start to get lost again, beside an AAZ has like 6 wires, how much harness do you have? Something about tubing... Recommendation of a website, which one?
I need a drink,
Ian
-
was just looking in Etka - could it be 021 971 848 A - cable holder connecting part cooling pipe
In Etka
MG = 9, SG = 71 illustration 194-20
-
Clip's , Not that part number
I will have the dealer bring in six different model's ( part #' )
Thanx GB