VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Grunttorque on December 14, 2008, 11:07:27 am

Title: AAZ Remote oil filter housing
Post by: Grunttorque on December 14, 2008, 11:07:27 am

Anybody know where I can get a remote oil filter housing or a housing off a north south engine? I'm trying to gather everything up for my samurai conversion and the sideways mounted one I have now hits the new motor mount. thanks!

Nick

Title: AAZ Remote oil filter housing
Post by: Typrus on December 14, 2008, 11:25:33 am

Perma-Cool

Title: AAZ Remote oil filter housing
Post by: Grunttorque on December 14, 2008, 12:16:06 pm

Like this? http://www.perma-cool.com/Catalog/Cat_page27.html
I'm not sure what thread size I need.. or does it matter? Thanks

Title: AAZ Remote oil filter housing
Post by: Typrus on December 14, 2008, 01:35:35 pm

From Purolators site- Off a 95 Passat AAZ
L30257
UNF-2B thread pitch
3/4-16 threads

So 3/4-16 it looks like.

And yes, if you have room for the hoses that shoot straight out. I believe there is also a kit that shoots the hoses out sideways.

Title: AAZ Remote oil filter housing
Post by: Grunttorque on December 14, 2008, 05:23:18 pm

Thanks for the info! I'm going to try it out

Title: AAZ Remote oil filter housing
Post by: Luckypabst on December 14, 2008, 05:46:00 pm

I think I have the oil filter mount of a N-S 1.6TD out of a Quantum - I think that's what the Sammy swap uses - will it fit your AAZ? I dunno. PM me and I'll look for it tomorrow.

Chris

Title: AAZ Remote oil filter housing
Post by: Dr. Diesel on December 15, 2008, 03:18:52 am

i think the other option is to use a filter flange from a VW fox. They've got a special angle on them that does the trick. (apparently)

Title: AAZ Remote oil filter housing
Post by: Sierra94 on December 15, 2008, 06:06:39 am

Order one for a Ford V8 engine. They fit. I ordered mine from summit racing.

Title: AAZ Remote oil filter housing
Post by: DYNOMAX on March 03, 2009, 05:08:05 pm

This is a stock oilfiltermount to a Audi 1.6TD with oil cooler connections and built-in thermostat (100C) 200F.

(http://i289.photobucket.com/albums/ll222/Savarturbo/P1000038.jpg)

(http://i289.photobucket.com/albums/ll222/Savarturbo/P1000039.jpg)

(http://i289.photobucket.com/albums/ll222/Savarturbo/P1000040.jpg)

(http://i289.photobucket.com/albums/ll222/Savarturbo/P1000042.jpg)

Title: AAZ Remote oil filter housing
Post by: RabbitJockey on March 03, 2009, 05:21:06 pm

that looks nice i bet those hit the front motor mount tho

Title: AAZ Remote oil filter housing
Post by: DYNOMAX on March 03, 2009, 05:48:05 pm

Yes sir.
It's completely impossible to make it fit behind the radiator especially with the bigger Mann 940/25 filter.