VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: VW_Commuter on November 17, 2008, 08:57:32 pm

Title: IP Ugliness
Post by: VW_Commuter on November 17, 2008, 08:57:32 pm

The previous owner of my Jetta didn't do a very good job of keeping the water out of the fuel system as evidenced by the following pics.

(http://i425.photobucket.com/albums/pp337/girick1/IP_CamPlate.jpg)
IP cam plate

(http://i425.photobucket.com/albums/pp337/girick1/IP_Roller.jpg)
IP Roller



Ugly with a CAPITAL U.  I was really impressed with the depth of the pits on the cam plate and on the rollers.  The areas that now look like the surface of the moon used to look nice and shiny.  Good thing I have that cam plate and 10mm head that I got off of Jimfoo through ebay or things would be really ugly.  Giles has a kit with the rollers, shafts, and the special curved washers that I'm going to get and that will replace everything else.  The head that came off the pump doesn't look too bad but I won't be able to judge it completely until I finish with all of the rest of the IP internals and housing in the parts washer.

Title: IP Ugliness
Post by: blkboostedtruck on November 17, 2008, 09:04:53 pm

candidates for the wall of carnage ?
Duane

Title: IP Ugliness
Post by: VW_Commuter on November 17, 2008, 09:09:46 pm

I was thinking of hanging it on a chain around my neck for some great Diesel Bling  :lol:

Title: IP Ugliness
Post by: Smokey Eddy on November 17, 2008, 09:57:51 pm

(http://www.dyers.org/images/200805/mr-t-gold-chains-sparkling.gif)
If i knew what i was doing that TR3 or what ever it says would say GTD :wink:

Title: IP Ugliness
Post by: Quantum TD on November 17, 2008, 10:00:18 pm

I've got a couple of pumps that are similar, but not quite that bad. Most sat outside exposed for some time, and still aren't that rough.

Yeetch!

Title: IP Ugliness
Post by: zukgod1 on November 18, 2008, 07:42:47 am

That's nasty, just nasty.

Title: IP Ugliness
Post by: Gearhead on November 18, 2008, 11:25:16 am

I had a pump like that.  The reason mine was like that was the "engine stopped running" so they parked it.  I thought it stopped running because it ingested some water, and that water sat at the bottom of the pump while it sat for a long time.  The lower section of the camplate and rollers were messed up.  The top part was nice & shiney.