VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: ilikevwdiesel on November 14, 2008, 04:22:43 pm
-
Hey what's up with using 1.6 injectors in an AAZ motor, I put some in my caddy and the 1.6 injector lines wouldn't fit properly. Anyone have any tips for me? Can you even use the short injectors in an AAZ?
-
im going to use short 1.6 injectors in an AAZ head.
but you have to use a 1.6 pump mounting bracket and likely the pump too (unless they are the same dimensions right?)
I know that you need to keep injectors,lines and the pump mounting bracket all the same.
-
Early Canadian B3 Passats came with essencially 1.6 injectors on the 1.9 engine. Those lines would fit perfectly. I hopefully still have a set because I will need them on my engine.
-
Early Canadian B3 Passats came with essencially 1.6 injectors on the 1.9 engine. Those lines would fit perfectly. I hopefully still have a set because I will need them on my engine.
thanks tyler, what do think I should do? I only have 1.6 TD lines and one set of 1.9 AAZ lines...I want to use 1.6 injectors, my AAZ injectors are getting craters around the pintles
-
im going to use short 1.6 injectors in an AAZ head.
but you have to use a 1.6 pump mounting bracket and likely the pump too (unless they are the same dimensions right?)
I know that you need to keep injectors,lines and the pump mounting bracket all the same.
so you think that on a 1.9 TD if you're using 1.6 injectors you need to use a 1.6 mount bracket, pump lines and the injectors? Is that what you mean?
-
keep it simple, the only difference is on the pipes, 1.6 injectors=1.6 pipes
at least I had to use 1.9 piping to use a 1.9 injector on my 1.6TD, should be the same
-
keep it simple, the only difference is on the pipes, 1.6 injectors=1.6 pipes
at least I had to use 1.9 piping to use a 1.9 injector on my 1.6TD, should be the same
but I put the 1.6 injectors into the 1.9 engine and the 1.6 lines didn't fit! was I hallucinating? :?
-
im going to use short 1.6 injectors in an AAZ head.
but you have to use a 1.6 pump mounting bracket and likely the pump too (unless they are the same dimensions right?)
I know that you need to keep injectors,lines and the pump mounting bracket all the same.
so you think that on a 1.9 TD if you're using 1.6 injectors you need to use a 1.6 mount bracket, pump lines and the injectors? Is that what you mean?
uhh yeah that's what i mean ....
*thinking*
Pretty sure you need the correct pump bracket. I read that on here somewhere.
-
keep it simple, the only difference is on the pipes, 1.6 injectors=1.6 pipes
at least I had to use 1.9 piping to use a 1.9 injector on my 1.6TD, should be the same
but I put the 1.6 injectors into the 1.9 engine and the 1.6 lines didn't fit! was I hallucinating? :?
It won't fit. The 1.9 block is taller then the 1.6. You'll have to bend a set of lines. I'd bend whatever lines are a closer match. Why not get the 1.9 injectors rebuilt? They are suppose to give better emmisions and economy because of the dual spring.
The pump mount is irrelevant.
-
The pump mount is irrelevant.
Oh, ok.
I don't know why i thought you had to use the same pump mount... where did i read that...