VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Mardak on October 28, 2008, 06:51:21 pm

Title: R&R'ing same IP - does timing need to be set?
Post by: Mardak on October 28, 2008, 06:51:21 pm

Hi guys,

I need to remove the injection pump on my brother's 90 Golf in order to remove the a/c, alt bracket (busted bolt inside the bracket).  I don't have much experience working on diesels (but almost 20 years experience on A1/A2 VW's) and was wondering if it's possible to remove/move the IP out of the way and bolt it back up without having to set the pump timing.   I just need to move it enough to gain access to the bracket bolt(s?) underneath.

Thanks for any advice!

Later,

Mark.
75 Scirocco
82 Scirocco
82 Rabbit Pickup - mTDI project
90 Audi Coupe Quattro 20v
90 Audi Coupe Quattro 10v turbo

Title: R&R'ing same IP - does timing need to be set?
Post by: burn_your_money on October 28, 2008, 07:01:46 pm

definitly needs to be retimed. If you are just rotating the pump, you could probably get away with just marking the pumps location relative to the bracket. I'd use 2 lines just to be safe