VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Dirtrag2 on April 04, 2008, 05:52:40 pm

Title: 1.6 engine what to keep?
Post by: Dirtrag2 on April 04, 2008, 05:52:40 pm

hi guy's!
I'm really pleased today :) just drove 250 km each way to pick up a fully functional 1.6 td engine for $cheap$ :P :lol:
it has a T3 turbo so that will be bolted up to my 1.9 to replace a K03 with a sick wastegate and I will also keep the boost pin. My question is: Are there any other parts I should keep before selling the motor?

also how do I go about setting the boost on this turbo :?: I have an intercooler ready so I would like to run about 15 psi.

Title: 1.6 engine what to keep?
Post by: dillenger1 on April 04, 2008, 07:15:02 pm

i wouldnt sell it! :shock:  :shock:

Title: 1.6 engine what to keep?
Post by: Possum79 on April 04, 2008, 07:45:12 pm

If I could get my hands on a functioning 1.6 or functioning anything id keep it. Then again you may have stuff laying around. I dont  :cry:

Title: 1.6 engine what to keep?
Post by: diesel smoke on April 04, 2008, 08:36:26 pm

You can give it to me! :wink:  :lol:

Title: 1.6 engine what to keep?
Post by: Dirtrag2 on April 05, 2008, 09:23:35 am

I would keep it but I don't have a garage to store it in and leaving it outside it will rust and be useless soon enough. :mrgreen:  

Anyhow... I was looking at the T3 turbo and the downpipe is definately different from my K03.  can i use a MK2 downpipe or do i have to have it all fabbed up?

Title: 1.6 engine what to keep?
Post by: shegel on April 05, 2008, 08:58:48 pm

i'll give you 400 + shiping if you are willing to send it here....for the whole  thing ofcourse

Title: 1.6 engine what to keep?
Post by: Dirtrag2 on April 06, 2008, 06:46:28 am

shegel, I sent you a PM ;)

Title: 1.6 engine what to keep?
Post by: burn_your_money on April 06, 2008, 06:54:39 am

expect to get killed on shipping... but if you do find a cheap method please let me know.

You can use the mk2 downpipe but you'll have to make a custom piece to connect it to the rest of the exhaust. Personally I would either fab up my own 2.5" downpipe or buy one from PP. Your engine will love you for it.

Title: 1.6 engine what to keep?
Post by: Dirtrag2 on April 06, 2008, 07:11:24 am

thanks Burn, I think I will have the 2.5" pipe fabbed up, also, seeing as in Quebec we have no emissions tests I might go all the way and have a custon exhaust all the way back, no cat :twisted: