VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: ezekiel on March 28, 2008, 08:16:16 pm

Title: setting thrust bearing end play?
Post by: ezekiel on March 28, 2008, 08:16:16 pm

so, I'm starting assembly on my engine, and the standard sized thrust bearings (6-piece) are too big, is it NORMAL to have to flat-sand/grind them into spec?  The crank was only polished, wasn't ground.

thanks

--Justin