VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: la_poire on March 07, 2008, 09:15:08 pm

Title: 11 mm plunger in a 1.6TD
Post by: la_poire on March 07, 2008, 09:15:08 pm

can i put a 11 mm plunger in my 1.6 td with AAZ dual stages injectors , gtd nozzles, and peugeot camplate? with a 20 mm axles (peugeot)? it is not too big? with 20 psi boost, AAZ head, fmic thanks

Title: 11 mm plunger in a 1.6TD
Post by: Benjamin on March 10, 2008, 09:10:39 am

any 11mm wich turns Right (like your vw) will fit your pump, i dont see why you wanna use another camplate, unless you are realy knowing what you are doing, but than you shouldnt ask the question

Greetz, Benjamin

Title: 11 mm plunger in a 1.6TD
Post by: la_poire on March 11, 2008, 03:03:37 am

Quote from: "Benjamin"

any 11mm wich turns Right (like your vw) will fit your pump, i dont see why you wanna use another camplate, unless you are realy knowing what you are doing, but than you shouldnt ask the question

Greetz, Benjamin

i can use fiat camplate in a IDI? if i can it's great, i fit the pump without modification  :D

Title: 11 mm plunger in a 1.6TD
Post by: la_poire on March 11, 2008, 03:54:26 am

Quote from: "Benjamin"

any 11mm wich turns Right (like your vw) will fit your pump, i dont see why you wanna use another camplate, unless you are realy knowing what you are doing, but than you shouldnt ask the question

Greetz, Benjamin

my 11 mm plunger came from tdi 2l fiat, fiat tdi camplate is ok for idi application?

Title: 11 mm plunger in a 1.6TD
Post by: la_poire on March 15, 2008, 02:11:38 am

Quote from: "libbybapa"

You don't want to use a TDI camplate on an IDI engine.

Andrew

it's the reason, i want to use peugeot camplate

Title: 11 mm plunger in a 1.6TD
Post by: DA-BRT on April 21, 2008, 06:26:44 am

I think you're talking about a Fiat Croma TDID pump. Yes it can be fit at our IDI's. The camplate is somewhere between our IDI and DI. Defenitely not suitable for our IDI's (replace with electronic DI camplate)

Title: 11 mm plunger in a 1.6TD
Post by: mdonau on April 21, 2008, 02:43:48 pm

i am running a xud12 (2,1L TD) pump with 10mm plunger..
my 11mm wont fit to the camplate... pump works great on my AAZ with 1Z timingbelt-wheel!

Title: 11 mm plunger in a 1.6TD
Post by: dillenger1 on April 21, 2008, 02:55:40 pm

I used a LDA and 10mm plunger from a peugoet 505 td.While dissassembling the pump i measured some things and the camplate was the same as the one for the 1.6na