Author Topic: FS: injection pump parts (Read 5764 times)

vwmike · « **on:** February 06, 2007, 07:16:14 pm »

I'm getting out of messing with VE pumps for now and am trying to clear some space so I'm looking to sell what I have left. If you need any part of this stuff let me know. I'd also be interested in selling things as a lot, perhaps to someone who is looking to build some pumps.

The LDA pins along with the LDA top are from a Peugeot which is a smaller diameter than the VW TD pin. The TDI pump is missing the pump head assembly, cam plate (though I may have another cam plate) timing spring, cover, etc. It is off of an AHU so it has the 8 pin quantity adjuster.

One of the pumps seems to be complete minus the timing spring and cover which I may be able to find though I know nothing about this pump.

I've seen a total of 5 IDI cam plates. All of the pump heads are 9mm. Post of IM me with questions.

scopefrfd · « **Reply #1 on:** February 06, 2007, 07:33:13 pm »

I'm interested in any 10mm and up pump heads...any?

vwmike · « **Reply #2 on:** February 06, 2007, 07:35:34 pm »

none currently.

RabbitGTDguy · « **Reply #3 on:** February 06, 2007, 08:45:08 pm »

what are you looking to get for the one LDA you have and I'd like the matching "tall" throttle shaft/gov cage assembly for it as well. I'd be interested in that to have around for spare parts ... possibly the TDI pump too if the timing internals are there for it...

Joe

vwmike · « **Reply #4 on:** February 06, 2007, 08:54:56 pm »

I'll look and see what I can find. The LDA lid is off of a peugeot.

vwmike · « **Reply #5 on:** February 16, 2007, 05:20:36 pm »

I still have a bunch of this stuff if anyones interested.

scopefrfd · « **Reply #6 on:** February 16, 2007, 05:34:04 pm »

I'd be interested in any 1,9 camplates tdi and idi

vwmike · « **Reply #7 on:** February 16, 2007, 07:31:50 pm »

I just have one TDI cam plate I'm contemplating selling. The other cam plates are all off of 1.6's.

scopefrfd · « **Reply #8 on:** February 16, 2007, 07:45:57 pm »

A tdi camplate is a drop in for both the 1.9td and 1.6td pumps?

vwmike · « **Reply #9 on:** February 16, 2007, 08:23:22 pm »

So long as the 1.9 has the larger plunger foot that seats into the cam plate properly I see no reason why it wouldn't work....however the 1.6 pumps have a smaller plunger foot so you'd have to use a pump head from a 1.9 or another properly sized one.

scopefrfd · « **Reply #10 on:** February 16, 2007, 08:35:28 pm »

gotcha...email me if you decide to sell the tdi camplate.

thanks

Biomen · « **Reply #11 on:** February 17, 2007, 01:35:15 am »

Looking to make an Mtdi pump.any 20 mm parts????How much for everithing???

vwmike · « **Reply #12 on:** February 17, 2007, 05:05:52 am »

There isn't a whole lot of TDI specific parts here but there are lot of odds and ends though I doubt you could put all of the pumps back together or anything. Make me an offer if you want it all.

foxracer1 · « **Reply #13 on:** February 17, 2007, 07:05:28 pm »

Do you have any with the idle up control on the cold start?

vwmike · « **Reply #14 on:** February 26, 2007, 11:39:07 pm »

Are you referring to the KSB or the wax pot?