He means the adjustment of the shaft on which the governor gear/flyweights are mounted. It is normally inaccessible due to the pump bracket being in the way.
How do I know what Bosch VE Pump I have or am looking at buying?The Bosch part number on the Bosch VEs pumps are fairly standard i.e. 0-460-4XX-XXX VE , what are important to note are the 6th and 7th digits of the Bosch Number. The 6th digit indicates the plunger size, 9 for 9mm, 0-10mm, 1-11mm, 2 for12mm. The 7th digit the is the application, 4 for 4cyl., 6 for 6cyl., etc. The specific manufacturers part number may also be on the pump and completly different, for example, the Cummins 4BT injection pump numbers do not indicate plunger size, everyone I have seen to date has been 12mm. Since the 4BT is a 4 Cylinder engine we can assume that part.3917530 1986-90 VE Series Rotary, CPL 858, 105 HP 3908191 1986-90 VE Series Rotary, CPL 767, 105 HP 3917535 1986-90 VE Series Rotary, CPL 857, 120 HP3906631 1986-90 VE Series Rotary, CPL 593, 105 HP3919716 1991-93 VE Series Rotary, CPL 1260, 105 HP3926831 1991-93 VE Series Rotary, CPL 986 & 1848, 120 HP The only way to know for sure is with the Bosch part Number.
I don't know if this link has been posted before but it is very useful for crossing Bosch and vehicle manufacturers P/Ns and even finding #s for indevidual pump parts by application. The pages take a minute or two to load.enjoy.http://www.vepump.cn/CZB.htm
Ok...... so I am trying to get a grip with the Bosch or VAG part number for any VAG 11mm (auto trans) electric pump. From the first quote (which seems to make logical sense) it would appear that there would be an 0-460-414-XXX pump that would be fitted to a VW application, but I could not find one on the list in the 2nd quote.Does anyone have any actual part numbers and application that I can use to trawl through E-bay / scrapyards / classifieds please? So far every "breaking TDI" I have emailed on ebay has come back with a 0-460-404-XXX, regardless of transmission.Or could it be that there are some 11 mm pumps with 0-460-404-XXX part numbers?
All bosch pumped ford transit 2.5 di's, the 'smiley face' ones, my '95-'99, have an 11mm head, thats what I used. Common as muck and cheap as chips!
how to increase timing advance as rpms or load increase
When you say "I have gov with 2 springs", are you talking about "Timing is from 1.9td dual spring?" I just want to make sure we are talking about the same thing. Also, is there another electronic solenoid on the side of your pump that looks the same as the stop solenoid?