Model Specific Questions and Info > MK2 Golf/Jetta and Audi 5k
Snapped Camshaft
(1/1)
Studdley:
I was spending the weekend giving my mk2 1.6 NA some much needed attention. I resealed the IP new cam cover gasket etc. I went to crank the car, heard a snapping sound and saw the sprocket go limp. The cam snapped between the two lobes for cylinder number 1. Am I good to throw another cam in it or do I need to pull the head and throw a new one on. PS I'm in the market for some 1.6 parts lol
srgtlord:
Time for a new head, head-gasket and headbolts if the pistons still look ok
Studdley:
That's what I figured. I must have timed it 180 out.
ORCoaster:
Timing it 180 out would not have cracked the cam. It will actually run like crap at 180 out, done all the time with those two-hole sprockets on the IP. I have to watch mine. I should just put some paint on the inside of the one that is correct. Maybe bright RED
I bet you were a couple to three teeth off and it just hit hard on the valve and popped a weak cam.
rabbitman:
Always turn the crankshaft two turns after putting a timing belt back on.
Navigation
[0] Message Index
Go to full version