-
wtb :: td idler pulley setup
by
Jaceb-GLI
on 21 Jan, 2014 15:28
-
Okay I was having some problems with this when I first got the car running and turns out I was missing a bolt.
It threw a belt on me last year and I pulled the idler off and devised a new setup with a shorter belt. I misplaced the pedestal that the pulley goes on.
So long story short, I need a pedestal and the associated hardware for mounting properly. Dire need.
Let me know if you have what I need.
-
#1
by
theman53
on 21 Jan, 2014 18:38
-
I think the Dakotakid might have one. Whether he wants to sell it to you or not I don't know. Worth asking.
-
#2
by
bbob203
on 21 Jan, 2014 20:15
-
pm sent
-
#3
by
Dakotakid
on 22 Jan, 2014 00:54
-
Did you find what you need?
-
#4
by
bbob203
on 22 Jan, 2014 07:47
-
I have an extra of what he needs if what I think he needs is what I have. Sold my mk2 so I don't need it for a spare any longer.
-
#5
by
Jaceb-GLI
on 22 Jan, 2014 11:30
-
I Haven't found exactly what I need yet. Thanks fellas.
I have the idler, I just need the pedestal and the mounting bolts. Ill see if I can find a pic.
-
#6
by
TylerDurden
on 22 Jan, 2014 12:01
-
This?
(#45)
-
#7
by
bbob203
on 22 Jan, 2014 12:03
-
^thats what i was thinking. I have that.. I texted a pic no answer.
-
#8
by
Jaceb-GLI
on 22 Jan, 2014 15:40
-
Yep that's it. Thanks for the diagram. I sent you a message back. Im missing 41-49 except for the pulley itself.
-
#9
by
Dakotakid
on 22 Jan, 2014 16:26
-
A few years ago, the 46 and 47 shields were still avail. at dealers. They are good to have to save splash or dirt in the bearing on the wheel.