i have had people ask for my b4 pedals and such for their mk2.. i see posts looking for b3 stuff.. want to point this out to you guys...
holes required in firewall
sort of major required piece.. to the left is stock booster bracket.. to right is a ABS bracket.. but you need the piece to the right of it to hold the clutch slave!! as you see i have to fab.. non abs piece is direct bolt on...
is a close up of the roddo/b3 clutch mount for master.. b4 is 100% different... b4=mk3 master!!! different!!! why... the b4/mk3 have a stamped arm/leg the master has a squeeze plastic clip to hold in place... why... important... this can be made on a mk2 pedal pretty easy...
if a far out look of it.. b3/roddo..
stock mk2 pedals.. to extend it up with say piece of angle.. you can make that "pivit pin" via a bolt, nut so on to affix the clutch master to the stock mk2 pedals..