S-PAutomotive.com

Author Topic: Vanbcguy's M-TDI Build  (Read 95262 times)

Reply #15March 14, 2013, 01:28:58 pm

vanbcguy

  • Administrator
  • Veteran

  • Offline
  • *****

  • 2831
  • Personal Text
    Vancouver, BC
Re: Vanbcguy's M-TDI Build
« Reply #15 on: March 14, 2013, 01:28:58 pm »
My PD150 intake + race pipe showed up in the mail this morning...  ;D ;D ;D

thumbsup!! I got one too!

Took a look in my racepipe - while it looks great (stainless is sexy!) there's a fair amount of fine metal particles coating the inside.  Definitely want to clean the hell out of it before it gets anywhere near my engine!!

I guess it has been on a lathe during manufacture as it has some nice chamfered edges and a good band for the IC piping to grab on to.

Bryn

1994 Jetta - AHU M-TDI - Jezebel Jetta
2004 Jetta Wagon - 1.8T - Blitzen

Reply #16March 15, 2013, 09:14:32 am

vanbcguy

  • Administrator
  • Veteran

  • Offline
  • *****

  • 2831
  • Personal Text
    Vancouver, BC
Re: Vanbcguy's M-TDI Build
« Reply #16 on: March 15, 2013, 09:14:32 am »
Trying to decide if I need a lift pump or not...

I saw some folks doing the PD in-tank pump.  Great for that 'all stock' feel and probably the perfect solution for Mk4+.  I did find someone doing it on a Mk3 though and the fuel gauge gets totally screwed up.  Not a fan of that.

Also did some poking around and found there are some commonly available small lift pumps for the Duramax guys that are under $50, like the Airtex series.  The E3526 seems perfect - max 35GPH open flow, rated at around 7PSI.  Nice and small, easy to find anywhere diesel pickups are found (ie anywhere outside of a city).  If I decide I need one I'm probably going that way.
Bryn

1994 Jetta - AHU M-TDI - Jezebel Jetta
2004 Jetta Wagon - 1.8T - Blitzen

Reply #17March 15, 2013, 12:58:40 pm

8v-of-fury

  • Guest
Re: Vanbcguy's M-TDI Build
« Reply #17 on: March 15, 2013, 12:58:40 pm »
I would install one regardless.

No prime time, no worries of being stranded by loosing prime, saves battery and starter in case of lost prime ;)...

The benefit might not be for POWAH, but convenience.

Reply #18April 19, 2013, 10:09:00 pm

vanbcguy

  • Administrator
  • Veteran

  • Offline
  • *****

  • 2831
  • Personal Text
    Vancouver, BC
Re: Re: Vanbcguy's M-TDI Build
« Reply #18 on: April 19, 2013, 10:09:00 pm »
More parts sold that I'm not using, more incoming stuff! Received an 02A, a set of the larger vented brakes with spindles and a starter today. Happy happy!

As if April 26th I'll be completely debt free which should start making more stuff happen here.

Sent from my HTC One X using Tapatalk 2
Bryn

1994 Jetta - AHU M-TDI - Jezebel Jetta
2004 Jetta Wagon - 1.8T - Blitzen

Reply #19April 19, 2013, 10:56:57 pm

8v-of-fury

  • Guest
Re: Vanbcguy's M-TDI Build
« Reply #19 on: April 19, 2013, 10:56:57 pm »
As if April 26th I'll be completely debt free which should start making more stuff happen here.

I have no debt.. but I don't make enough to do what I want either.. haha. congrats man :)

Reply #20May 05, 2013, 03:54:19 pm

vanbcguy

  • Administrator
  • Veteran

  • Offline
  • *****

  • 2831
  • Personal Text
    Vancouver, BC
Re: Re: Vanbcguy's M-TDI Build
« Reply #20 on: May 05, 2013, 03:54:19 pm »
Well one little snag...

My wife and I had a bit different understanding around how frequently the oil was being checked in her Jetta. I drove it yesterday for the first time in months - oil pressure beeper kept going off and the lifters were clattering like crazy. Had to add 2L to even get it to show on the dipstick. Grrr... This is her first car so I should have been on it more myself. Valve train is quiet now but it's still throwing oil pressure alarms and the oil smells like molten lead.

Sooo.... Guess we need to find another beater for her first. That's going to delay my build a bit. I'm going to put some thick oil in to see if it'll take care of the low pressure enough to keep the alarm off but that's pretty much all she wrote or Jezzie's sister. The car needs way too much other stuff to bother fixing it.

Gargamel!

Sent from my HTC One X using Tapatalk 2
Bryn

1994 Jetta - AHU M-TDI - Jezebel Jetta
2004 Jetta Wagon - 1.8T - Blitzen

Reply #21May 05, 2013, 04:04:32 pm

bbob203

  • Veteran

  • Offline
  • ***

  • 1789
Re: Vanbcguy's M-TDI Build
« Reply #21 on: May 05, 2013, 04:04:32 pm »
oof thats a tough one my girlfriend does same stuff drives it 5-10k past oil changes frequently. i secretly want her mazda to kick it though.
92 Passat wagon M-TDi
03 Jetta wagon TDi
VE Timing tools for rent
Need a car transported a long distance? Pm me for details.

Reply #22May 05, 2013, 09:08:44 pm

libbydiesel

  • Global Moderator
  • Veteran

  • Offline
  • *****

  • 3416
Re: Vanbcguy's M-TDI Build
« Reply #22 on: May 05, 2013, 09:08:44 pm »
The fact that the buzzer was going off is a bit hard to take.  Anyway, I check the oil in my wife's care.   ;) 

Reply #23May 06, 2013, 10:57:30 am

vanbcguy

  • Administrator
  • Veteran

  • Offline
  • *****

  • 2831
  • Personal Text
    Vancouver, BC
Re: Vanbcguy's M-TDI Build
« Reply #23 on: May 06, 2013, 10:57:30 am »
The fact that the buzzer was going off is a bit hard to take.  Anyway, I check the oil in my wife's car.   ;) 

Yeah - I had been out of town all week too.  It was "just" going off when she was turning corners and she didn't think it was a big deal so she decided to wait till I got back.  Bah.  At least it was only a $1200 car to begin with.
Bryn

1994 Jetta - AHU M-TDI - Jezebel Jetta
2004 Jetta Wagon - 1.8T - Blitzen

Reply #24May 17, 2013, 12:28:04 am

vanbcguy

  • Administrator
  • Veteran

  • Offline
  • *****

  • 2831
  • Personal Text
    Vancouver, BC
Re: Vanbcguy's M-TDI Build
« Reply #24 on: May 17, 2013, 12:28:04 am »
Hookay, so after a whirlwind of sketchy Craigslist folks and a whole lotta test driving of vehicles I got rid of the bad oil pressure Jetta and my rusty old pickup truck, plus emptied my bank account so I could end up with this for my wife (who will now be checking her oil!!)



OK yeah it's for me too, but Jezebel ain't going anywhere.  The new Jetta is a 1.8T - filling up with premium at $1.61/L when diesel is at $1.36/L is definitely... noticeable.  But she doesn't put that many miles on really.

Anyhow, I will be done paying for that adventure in July, at which point this build will get going again.  In the meantime, I've got:

- my PD150 intake
- the actual engine
- a CTN 02A
- the proper Mk3 TDI brake setup

I MIGHT be able to get some more parts going a bit sooner - I have a side gig that has suddenly given me a bunch more hours.  I promise this build really is going to happen!!
Bryn

1994 Jetta - AHU M-TDI - Jezebel Jetta
2004 Jetta Wagon - 1.8T - Blitzen

Reply #25June 01, 2013, 12:13:24 am

bbob203

  • Veteran

  • Offline
  • ***

  • 1789
Re: Vanbcguy's M-TDI Build
« Reply #25 on: June 01, 2013, 12:13:24 am »
Have you decided on the turbo and manifold yet? I want to get bigger turbo for my mtdi and am looking for ideas. I want top mount for sure.
92 Passat wagon M-TDi
03 Jetta wagon TDi
VE Timing tools for rent
Need a car transported a long distance? Pm me for details.

Reply #26June 01, 2013, 03:53:26 am

vanbcguy

  • Administrator
  • Veteran

  • Offline
  • *****

  • 2831
  • Personal Text
    Vancouver, BC
Re: Re: Vanbcguy's M-TDI Build
« Reply #26 on: June 01, 2013, 03:53:26 am »
I have a manifold designed for 2L 8V that's top mount I found. I'm flirting with a VNT solution at the moment so I haven't committed yet to anything in specific, but if I go with the GT2056 I think it's a Kinetic manifold... Need to check my bookmarks when I'm at the computer. That combo would still need a T3 to T25 adapter but that is verging on common.

Sent from my HTC One X using Tapatalk 2
Bryn

1994 Jetta - AHU M-TDI - Jezebel Jetta
2004 Jetta Wagon - 1.8T - Blitzen

Reply #27June 01, 2013, 09:21:09 am

bbob203

  • Veteran

  • Offline
  • ***

  • 1789
Re: Re: Vanbcguy's M-TDI Build
« Reply #27 on: June 01, 2013, 09:21:09 am »
I have a manifold designed for 2L 8V that's top mount I found. I'm flirting with a VNT solution at the moment so I haven't committed yet to anything in specific, but if I go with the GT2056 I think it's a Kinetic manifold... Need to check my bookmarks when I'm at the computer. That combo would still need a T3 to T25 adapter but that is verging on common.

Sent from my HTC One X using Tapatalk 2

talk to andrew he's working on something that may help you out with vnt..standalone controller for mtdi vnt.
92 Passat wagon M-TDi
03 Jetta wagon TDi
VE Timing tools for rent
Need a car transported a long distance? Pm me for details.

Reply #28June 01, 2013, 09:29:36 am

libbydiesel

  • Global Moderator
  • Veteran

  • Offline
  • *****

  • 3416
Re: Vanbcguy's M-TDI Build
« Reply #28 on: June 01, 2013, 09:29:36 am »
Yup, I am working on a standalone electronic VNT control.  I'm not sure yet of timing or price.

Reply #29June 01, 2013, 11:17:55 am

vanbcguy

  • Administrator
  • Veteran

  • Offline
  • *****

  • 2831
  • Personal Text
    Vancouver, BC
Re: Re: Re: Vanbcguy's M-TDI Build
« Reply #29 on: June 01, 2013, 11:17:55 am »
Yup, I am working on a standalone electronic VNT control.  I'm not sure yet of timing or price.

Funny, I'm not sure about timing or price yet either!

Sent from my HTC One X using Tapatalk 2
Bryn

1994 Jetta - AHU M-TDI - Jezebel Jetta
2004 Jetta Wagon - 1.8T - Blitzen

 

S-PAutomotive.com