« previous next »
Pages: 1 [2]

Author Topic: Throttle shaft bushing not serviceable?  (Read 7243 times)

Reply #15March 05, 2013, 06:13:23 pm

8v-of-fury

  • Guest
Re: Throttle shaft bushing not serviceable?
« Reply #15 on: March 05, 2013, 06:13:23 pm »
Extremely hardened.. when I was doing my first custom M-tdi pump I had to modify the throttle lever, and part of it needed ground down..

JESUS, thought I was working with the hardest metal on the planet!
Logged
Reply #16March 05, 2013, 06:22:33 pm

92EcoDiesel Jetta

  • Guest
Re: Throttle shaft bushing not serviceable?
« Reply #16 on: March 05, 2013, 06:22:33 pm »
Quote from: 8v-of-fury on March 05, 2013, 06:13:23 pm
Extremely hardened.. when I was doing my first custom M-tdi pump I had to modify the throttle lever, and part of it needed ground down..

JESUS, thought I was working with the hardest metal on the planet!

It's probably hardened in the same batch as the fuel limiter pin. That pin is f**kin HARD!!! I tried to grab it with Vise grips to twist it out and the Vise grip just slips, didn't even put a scratch on it!.
Logged
Pages: 1 [2]
« previous next »