-
for sale k24/k26
by
andy2
on 10 Jun, 2012 13:35
-
I have a k24/k26 that I wouldn't mind parting with.I built it about 4 yrs ago and intended to use it but never did.There is a couple pics of it in the links below.
http://andy2turbo.multiply.com/photos/album/12#photo=1http://andy2turbo.multiply.com/photos/album/12#photo=2http://andy2turbo.multiply.com/photos/album/12#photo=3It isn't rebuilt just reconditioned.It has ceramic coated turbine housing that was bored out to accept the k26 turbine wheel.The k26 compressor section is mounted to the k24 center housing.The wastegate is stock and in good working order.I made a spacer out of an old exh manifold to clearance the k26 compressor housing from the intake manifold.The turbine outlet flange holes were drilled and tapped for 10mm as we were planing on hanging another turbo form it.The 8 capscrews and spacer are included with this as well.
This turbo is obviously not a bolt on and would require a modified oil drain pipe hose due to the exh spacer.The compressor inlet and outlet are also different sizes that the k24.
looking $200 + shipping
-
#1
by
R.O.R-2.0
on 10 Jun, 2012 14:27
-
is this a K26 center section inside K24 housings?
or is it a K26 cold side on a K24 turbo?
-
#2
by
1.9aaz
on 10 Jun, 2012 16:22
-
cash today for 200 shipped to Pa 18360
-
#3
by
1.9aaz
on 10 Jun, 2012 16:33
-
On second thought.... i'll split shipping with you if your willing
-
#4
by
andy2
on 10 Jun, 2012 23:08
-
is this a K26 center section inside K24 housings?
or is it a K26 cold side on a K24 turbo?
This is k26 wheels with a k24 turbine housing bored out to accept the bigger k26 turbine wheel.It has a k24 center section not the k26 water cooled one.
-
#5
by
1.9aaz
on 11 Jun, 2012 09:23
-
Hi Andy,
Should I take your lack of response as a "not interested"? No hard feelings, just wanting to know if I should bid for one on ebay.
Andrew
-
#6
by
R.O.R-2.0
on 11 Jun, 2012 15:03
-
is this a K26 center section inside K24 housings?
or is it a K26 cold side on a K24 turbo?
This is k26 wheels with a k24 turbine housing bored out to accept the bigger k26 turbine wheel.It has a k24 center section not the k26 water cooled one.
ok, so it was built right then..
good deal!!
-
#7
by
andy2
on 11 Jun, 2012 17:55
-
Hi Andy,
Should I take your lack of response as a "not interested"? No hard feelings, just wanting to know if I should bid for one on ebay.
Andrew
As long as the shipping isn't too much then I'm sure we could work a deal.I can get a shipping quote likely tomarrow.
-
#8
by
1.9aaz
on 11 Jun, 2012 18:23
-
Thanks! I look forward to hearing from you.
-
#9
by
CrazyAndy
on 13 Jun, 2012 23:36
-
did 1.9aaz take it already?
Is the K26 compressor inlet O.D. larger than a K24?
-
#10
by
andy2
on 14 Jun, 2012 07:48
-
Yes,I will hopefully be shipping it out to him today.
I'm pretty sure that the compressor inlet OD is smaller for some reason.
-
#11
by
andy2
on 14 Jun, 2012 18:00
-
SOLD
-
#12
by
R.O.R-2.0
on 14 Jun, 2012 18:14
-
Yes,I will hopefully be shipping it out to him today.
I'm pretty sure that the compressor inlet OD is smaller for some reason.
Compressor inlet is SMALLER on the 26. the compressor wheel is MUCH larger, but the inlet is SMALLER for some reason..
-
#13
by
1.9aaz
on 14 Jun, 2012 18:38
-
Thanks Andrew!
Cant wait to post pics and and how she performs.
Andrew
-
#14
by
CrazyAndy
on 15 Jun, 2012 15:45
-
Yes,I will hopefully be shipping it out to him today.
I'm pretty sure that the compressor inlet OD is smaller for some reason.
Okay, no prob. So inlet OD is smaller, wierd. Have fun w/ that turbo for me!
So 2 other guys her named Andrew too? Crazy!