Giles Pump - Current Price Quote $750

[Giles@PerformanceDiesel]

here is a current price list for everyone to gander at

Normal full rebuild of:

1.6L NA pump....................$650
1.6L Turbo pump............... $750
1.9L Turbo pump................$750 (only if core internals are good)


Performance Rebuild

                                         $750
                                         $950
                                         $950

as above order.

custom build each pump to customers project build.  Turbo pumps are built a maximum of 20psi range of boost

if you want more it's more $ according to build requirements.

hope this lets people know of my prices, which BTW have not changed for the last 6 years.
if there was some previous prices lower than advertised it was in US$ and because of the  exchange rate.

Giles

[RadoTD]

Just out of curiosity here, but what would a ballpark price be on an AAZ pump built with a 12mm head built for ~40psi/230ish hp?

[mystery3]

Just out of curiosity here, but what would a ballpark price be on an AAZ pump built with a 12mm head built for ~40psi/230ish hp?

I'd email him/them as I don't believe he/they are on here too much and also would probably want some detail on your particular project like what turbo, exhaust sizing etc.

They respond to email quickly and are a pleasure to deal with in general.

[punkvideo81]

Giles is good, I bought my pump from him. Recommended!

[trav1856]

here is a current price list for everyone to gander at

Normal full rebuild of:

1.6L NA pump....................$650
1.6L Turbo pump............... $750
1.9L Turbo pump................$750 (only if core internals are good)


Performance Rebuild

                                         $750
                                         $950
                                         $950

as above order.

custom build each pump to customers project build.  Turbo pumps are built a maximum of 20psi range of boost

if you want more it's more $ according to build requirements.

hope this lets people know of my prices, which BTW have not changed for the last 6 years.
if there was some previous prices lower than advertised it was in US$ and because of the  exchange rate.

Giles

Just to clarify, I wasn't ***in' about it, Giles.

I'm sure you're really good at what you do, or else people wouldn't rave about you. Just on word of mouth alone and the number of positive reviews I get from you, I will at some point, use your services. This was more of a informational post from what I had to go on, so I hope no offense was taken.

[trav1856]

Just out of curiosity here, but what would a ballpark price be on an AAZ pump built with a 12mm head built for ~40psi/230ish hp?

I'd email him/them as I don't believe he/they are on here too much and also would probably want some detail on your particular project like what turbo, exhaust sizing etc.

They respond to email quickly and are a pleasure to deal with in general.

...and he's a really nice guy to chat back and forth with, I'm surprised how approachable he is, which is another testament and credit to him.

[Powered by Spearco]

Just as a price comparison. Giles did my pump which was a N/A body suppied with a TD/LDA top along with a TDI 10mm head and plunger. He supplied the cam plate rollers and springs for my super pump.
Total cost was $1200.

No need to look back at doing it with anyone else.
I will say the my local diesel injection shop knows of him and would love for me to bring in my pump. I say sorry, if you want to know whats been done, buy one for yourself.