-
Tools by location thread
by
Smokey Eddy
on 20 Jul, 2010 23:48
-
I was thinking; i have a bunch of tools i had to either make or buy for a very rare job i'm likely to never do again. And i'd love to save someone near by a few bucks by lending them OR to cover costs have a by donation system.
I have the triple square bit for head bolts, i have studs, and the one for CV joints. I also have a clutch centering tool I'm not likely to use again...
So, have a thread in the FAQ that would just be a single post that would group members by area by having links to pages that are FOR that area and if you're in that area you would post in that thread what tools you had up for use.
so for example: in the north western thread i'd post my triple square, CV joint bit and clutch centering tool. Perhaps even my aluminum post i made for removing valve keepers and what ever else i could find if this actually happened. Even if you're too far like say Calgary from Vancouver or Vancouver to Portland, it would be really cheap shipping to lend a tool.
just a thought.
Also, anyone near me (vancouver/lowermainland) I'd love to borrow a timing gauge for my injection pump!
Abbotsford, Lowermainland, British Columbia- 27mm deep socket (injectors)
- CV joint bit
- triple square head bolt bit
- valve keeper removal/install tool
- clutch centering tool
- home made intermediate shaft bearing press/puller
-
#1
by
commuter boy
on 28 Jul, 2010 00:14
-
I've got a timing gauge and adapter in Burnaby, you're welcome to come by and time it here. Doesn't take long.
-
#2
by
catlin_cava
on 28 Jul, 2010 00:48
-
Atlantic Provinces -
CV Joint Socket
Headbolt Socket
Wide Selection Of Sockets
Mig and Arc Welders
and I also have a boost gauge and connections.
-
#3
by
truckinwagen
on 28 Jul, 2010 01:04
-
Anchorage, AK
headbolt socket
CV socket
Axle nut socket
pressure/vac gauge for checking fuel line obstructions(very sensitive)
and a bunch more I am sure I am forgetting, but I will update this as I remember.
I am also willing to ship wherever(international too) as long as the tool comes back in a reasonable amount of time.
-Owen
-
#4
by
theman53
on 28 Jul, 2010 09:11
-
headbolt socket
CV socket
Axle nut socket
timing set
welder and torches
I also have many spray guns. I have some orbital sanders for body work as well.
In Central to northeast Ohio
-
#5
by
745 turbogreasel
on 29 Jul, 2010 02:32
-
Silicon valley California
I have pretty much everything for VW and D24.
OBDII read & reset
pop tester and transfer pressure gauge
Tow/recovery rig
-
#6
by
Rabbit on Roids
on 29 Jul, 2010 13:03
-
Pacific Northwest - North Oregon coast
1.5 head bolt hex bit (10mm)
triple square bits for axle flange bolts, and head bolts.
injector socket
cam lock tool
axle nut socket (the big one)
vw clutch align tool
valve removal tool
trans drain plug tool
drive flange remover/installer
whatever tools i dont have, my local fellow diesel freak has what i dont have, the timing gauge, and all the other special goodies i cant afford. and im sure i left alot of my arsenal off the list.
-
#7
by
lovinthedeez
on 01 Sep, 2010 11:08
-
got everything that kev has ^^^^^^^if you're travelling through southern oregon before you hit cali on I-5.
-
#8
by
macka
on 21 Mar, 2011 21:40
-
mk2 shifter alignment gauge
-
#9
by
trav1856
on 19 May, 2011 15:55
-
I've got Triple Square Bits in Cushing, OK 6mm - 12mm. I can get 'em for $5 a set (4 bits 6, 8, 10 I think, and 12 for the headbolts) They've been good to me..and I'm still using them. But if you're in the neighborhood and need to tighten/loosen something feel free to lemme know
added:
30mm axle nut socket
engine support bar (in use atm)
Welder (would need some advanced warning. Have pipeline welder and crackerbox)
Added: 11/8/2011
IP timing set (N/A and Turbo)
tranny case lub plug bit (1/2 drive)
several torque wrenches (click type)
-
#10
by
dalek
on 04 Jul, 2011 08:09
-
I have the triple squares from 6 to 10mm. I do not know if the VWs use them but I also have a precombustion chamber collar removal tool I used with Mercedes IDI engines... though it needs to be rewelded (I lent it to a machine shop who managed to break it). I also have the tool to remove the idler pulley pin off one of those Mercedes engines. Might get a VW timing tool soon as a friend has a 85 Volvo turbodiesel wagon.
And loads of metric tools.
And a car dolly with a car that has towed a few cars.
Gainesville FL
-
#11
by
R.O.R-2.0
on 16 Jul, 2011 14:40
-
Pacific Northwest - North Oregon coast
1.5 head bolt hex bit (10mm)
triple square bits for axle flange bolts, and head bolts.
injector socket
cam lock tool
axle nut socket (the big one)
vw clutch align tool (big and small)
valve spring compressor
trans drain plug tool
drive flange remover/installer
C clamp expander (exhaust)
heater core tester (its a real pain pulling your whole dash out to figure out the core was fine)
mk2 strut nut spanner socket
-
#12
by
RadoTD
on 16 Jul, 2011 17:46
-
I've got a fair number of tools, located in Coquitlam, BC. If anyone around here needs something, don't hesitate to send me a PM!
-
#13
by
Toby
on 29 Nov, 2011 03:59
-
PNW Tacoma WA area
Injector socket
Cam lock plate
IP lock pin
idler pulley pin spanner
VE dial indicator timing tool
Injector tester
Clutch aligning tool
Exhaust C clip remover/installer (clone of factory tool)
6,8,10,12mm 12 point bits
etc., etc., etc.
-
#14
by
oldpoopie
on 11 Dec, 2011 00:18
-
VCDS
Wheel bearing tools
Timing belt tools
intermediate shaft bearing tools.
Timing belt tension gauge
Injection pump dial indicator
Lots lots more