Author Topic: Package in Head Rebuild Kit (Read 2710 times)

somolovitch3 · « **on:** February 28, 2010, 11:25:16 am »

The Large Black half disk, and the Redish "U" shape I know, but what are the 4 rubber rings and the 4 large-ish flat "O" Rings for?
And only four?

As always Mr Phelps, any and all help is appreciated.

tia

1.6 n/a

Vincent Waldon · « **Reply #1 on:** February 28, 2010, 11:26:35 am »

1.6 or 1.9 kit?

somolovitch3 · « **Reply #2 on:** February 28, 2010, 11:35:22 am »

Sorry about that, 1.6 and added pic to original post.

Dakotakid · « **Reply #3 on:** February 28, 2010, 11:43:00 am »

Those are for the day you decide to run gas injectors in your diesel.

somolovitch3 · « **Reply #4 on:** February 28, 2010, 11:56:39 am »

Well, now you tell I need new(gas) injectors!?

Now that you pointed that out, yea that do look like them.

I wonder what else will turn up in this kit that really is not for a diesel?

Thanks alot you all and many man (where is my beer mug?) for you all as well.

And it could explaine the 3 different intake gaskets!

dash cunning · « **Reply #5 on:** February 28, 2010, 01:28:22 pm »

alot of the times they just package diesel and gasser kits together. at least the 4 kits i have got have always had heat shields and orings.

Vincent Waldon · « **Reply #6 on:** February 28, 2010, 03:17:02 pm »

If t'was for a 1.9 those donuts would be for the top of the valve cover... at least, three of 'em would be.

somolovitch3 · « **Reply #7 on:** February 28, 2010, 03:32:28 pm »

Once again, Thanks for all the help.

Vince, you mean they gave me an exta?

And the 4 flatened "O" Rings, anyone?

Vincent Waldon · « **Reply #8 on:** February 28, 2010, 05:17:28 pm »

Vince, you mean they gave me an exta?

Nah...you've got a 1.6 so doesn't use the same donuts on the valve cover.. but that's why I asked you which engine you were talking about.

macka · « **Reply #9 on:** March 01, 2010, 12:00:27 pm »

so a 1.6d and 1.8g use the same style of headgasket?