« previous next »
Pages: [1]

Author Topic: So are copper Head gaskets any good??  (Read 3642 times)

November 16, 2008, 10:17:11 pm

53 willys

  • Guest
So are copper Head gaskets any good??
« on: November 16, 2008, 10:17:11 pm »
I have been searching for a good 1.6td headgasket...I'm still very leery of the moded MLS gaskets.
got me wondering about copper head gaskets...I saw the link in the "compounds thread" to that place in cali that does copper head gaskets for the 1.6...the site makes the copper HG sound like the end-all do-all of HG's BUT....
I get on here and read about "Andy2" blowing his copper HG and copper firerings...I think he posted his went at around 30psi??.... but this was with VERY big compound turbos..
so my question is...is the copper HG any good for use guys not as extreme as andy2???
or is the 1.9 aaz MLS mod better then a copper gasket???
I just want something reliable and strong!

copper??? or AAZ MLS mod????

what gasket is better for 20-30psi..copper or MLS??
Logged
Reply #1November 16, 2008, 10:28:02 pm

burnt_servo

  • Veteran
  • Offline
  • ***
  • 278
So are copper Head gaskets any good??
« Reply #1 on: November 16, 2008, 10:28:02 pm »
you have a link for this place that makes the copper headgasket ?
Logged
1990 jetta , tweaked pump , tweaked turbo , ported head  2.5inch exhaust .

1993 dodge w250 , diesel ... removing the dead moose parts .
Reply #2November 16, 2008, 10:37:56 pm

53 willys

  • Guest
So are copper Head gaskets any good??
« Reply #2 on: November 16, 2008, 10:37:56 pm »
they show HG's for the VW 1.5, 1.6, 1.8, 2.0
I assume the 1.6 is the diesel since vw did not make a 1.6 gasser right??
I'm gonna call them in the morning and see what they say.....

http://www.headgasket.com/

archive of HG's... 8)
http://www.headgasket.com/contents/gasket%20archives.pdf
Logged
Reply #3November 17, 2008, 12:17:22 am

53 willys

  • Guest
So are copper Head gaskets any good??
« Reply #3 on: November 17, 2008, 12:17:22 am »
this looks cool!! wounder if they have it for our 1.6's?
http://www.scegasketsonline.com/products/ics.html


they show 1.6 diesel HG's...in copper...

http://www.scegasketsonline.com/shoponline.html
Logged
Reply #4November 17, 2008, 04:15:57 am

DCC

  • Junior
  • Offline
  • **
  • 184
So are copper Head gaskets any good??
« Reply #4 on: November 17, 2008, 04:15:57 am »
Yes, definitely it looks like thay have a HG for the 1.6 diesel. And they look amazing.  :shock:

Btw, vw did make a 1.6 gasser from 1975 onwards, the engine used on the Rabbit GTI. Both the 1.6 gasser and 1.5 diesel share origin: the 1.5 gasser engine.
Logged
Reply #5November 17, 2008, 06:27:01 am

myke_w

  • Veteran
  • Offline
  • ***
  • 1099
So are copper Head gaskets any good??
« Reply #5 on: November 17, 2008, 06:27:01 am »
keep in mind that you'd have to O-ring the head or block to use a copper HG
Logged
Contact me for hard to find for idi and tdi parts

Reply #6November 17, 2008, 07:17:15 am

zukgod1

  • Veteran
  • Offline
  • ***
  • 2817
So are copper Head gaskets any good??
« Reply #6 on: November 17, 2008, 07:17:15 am »
I don't see the copper gasket being a long term solution.

Then as Tyler mentioned the O Ring issue.
Logged
dan

99 Golf TDI (now CNG powered) , 82 TD Caddy
Reply #7November 17, 2008, 07:45:36 am

53 willys

  • Guest
So are copper Head gaskets any good??
« Reply #7 on: November 17, 2008, 07:45:36 am »
Quote from: "myke_w"
keep in mind that you'd have to O-ring the head or block to use a copper HG

not with this one...
http://www.scegasketsonline.com/products/ics.html
Logged
Reply #8November 17, 2008, 07:49:38 am

53 willys

  • Guest
So are copper Head gaskets any good??
« Reply #8 on: November 17, 2008, 07:49:38 am »
Quote from: "zukgod1"
I don't see the copper gasket being a long term solution.

Then as Tyler mentioned the O Ring issue.


I am having a hard time believing that oil filler cap rubber or modded gaskets with pieces of old gasket siliconed in is a long term solution either???

whats a guy to do if he wants 20-30psi??
20-30psi=fun zone :lol:
Logged
Reply #9November 17, 2008, 07:57:54 am

53 willys

  • Guest
So are copper Head gaskets any good??
« Reply #9 on: November 17, 2008, 07:57:54 am »
Logged
Reply #10November 17, 2008, 08:07:36 am

53 willys

  • Guest
So are copper Head gaskets any good??
« Reply #10 on: November 17, 2008, 08:07:36 am »
Quote from: "53 willys"
Quote from: "myke_w"
keep in mind that you'd have to O-ring the head or block to use a copper HG

not with this one...
http://www.scegasketsonline.com/products/ics.html

CRAP!!! I just called them they dont make this HG for the small VW bore guess I'm gonna just run the MLS mod :cry:

all I want is a GOOD hg...is that to much to ask??
Logged
Pages: [1]
« previous next »