Author Topic: 3" exhaust on 1.6 n/a  (Read 3360 times)

November 18, 2008, 08:38:45 pm

voodoo

  • Junior

  • Offline
  • **

  • 65
  • Personal Text
    she thinks my tractor's sexy
3" exhaust on 1.6 n/a
« on: November 18, 2008, 08:38:45 pm »
I didn't like the drinking straw that the factory put on so i fixed it.

3" straight pipe no muffler for a day or two until I go deaf.




Reply #1November 18, 2008, 08:41:03 pm

blkboostedtruck

  • Veteran

  • Offline
  • ***

  • 1535
3" exhaust on 1.6 n/a
« Reply #1 on: November 18, 2008, 08:41:03 pm »
what i can't hear you! :roll: L.O.L.
well i couldn't resist :D
Duane
injector rebuilds call  414-840-1395 for faster service not on line much!
'66 variant 1500S
'81 2dr n/a 1.6 diesel rabbit 8"lift 260K R.I.P.
'81 caddy gas 1.8 turbo/stroker W/N.O.S.
'81 caddy 1.9 turbo diesel
'82 caddy gas 1.8 G60
 3 jettas '82' '04 '14TDI
+1 rabbit,03 HD sc.eag. duece,46,&5

Reply #2November 18, 2008, 09:11:40 pm

SR Heer

  • Junior

  • Offline
  • **

  • 199
3" exhaust on 1.6 n/a
« Reply #2 on: November 18, 2008, 09:11:40 pm »
Deaf? I wonder what Db you are talking about here -
I don't know but my friend had a Caddy with three inch exhaust and it actually sounded good without a muffler! Not that loud and one could hear the wine of the turbo - cool!
97 Passat 1Z, 98 Jetta AHU, 91 Jetta AAZ TD, and 81 Rabbit Pickup

Reply #3November 18, 2008, 09:32:47 pm

SR Heer

  • Junior

  • Offline
  • **

  • 199
3" exhaust on 1.6 n/a
« Reply #3 on: November 18, 2008, 09:32:47 pm »
Yah I see what you mean - Andrew, I think your comments and answers make more sense than everyone else's -  but might just be me - anyway I saw the intake and was wondering the same thing - say I see others kind of building a home built ram duct affect for NAs out of black PVC piping - has anyone thought of putting some small 12V electric fans inline or in front of piping to act as a sort of mini supercharger all at the flick of a switch? I wonder where I might look to get some? any ideas on this?
Thanks
97 Passat 1Z, 98 Jetta AHU, 91 Jetta AAZ TD, and 81 Rabbit Pickup

Reply #4November 18, 2008, 09:44:05 pm

blkboostedtruck

  • Veteran

  • Offline
  • ***

  • 1535
injector rebuilds call  414-840-1395 for faster service not on line much!
'66 variant 1500S
'81 2dr n/a 1.6 diesel rabbit 8"lift 260K R.I.P.
'81 caddy gas 1.8 turbo/stroker W/N.O.S.
'81 caddy 1.9 turbo diesel
'82 caddy gas 1.8 G60
 3 jettas '82' '04 '14TDI
+1 rabbit,03 HD sc.eag. duece,46,&5

Reply #5November 19, 2008, 01:31:07 am

Smokey Eddy

  • Veteran

  • Offline
  • ***

  • 3468
    • McScrubbins Body Wash
3" exhaust on 1.6 n/a
« Reply #5 on: November 19, 2008, 01:31:07 am »
Do those actually work?
If they actually do why doesn't everyone have one and why don't cars come from the factory with them?
For that low price i really wonder what you're actually getting.
Anyone used/have one of these?
Do they make more than 5 psi? at any cfm :P
Ed
Blacked out mk2 AAZ Jetta RIP. You are missed.
White 1999.5 ALH Golf 2dr. Low & wide. Rammed off the road RIP.
Blue 2009 CR140 Jetta CBEA/CJAA. Malone stage 2. EGR/DPF/Exhaust-valve deletes. 2.5" open exhaust. ADP Turbo swap. 1-stage nitrous kit. THROWN ROD

Reply #6November 19, 2008, 02:39:51 am

clbanman

  • Veteran

  • Offline
  • ***

  • 705
  • Personal Text
    Cambridge, Ontario
3" exhaust on 1.6 n/a
« Reply #6 on: November 19, 2008, 02:39:51 am »
It's an absolute scam.  A blower that is cheaper than your heater fan motor is supposed to pressurize your intake?  Then take a look at the wiring.  The wires and switch provided couldn't run enough amps to run a blower capable of generating even 2 pounds of boost.
Calvin
91 VW Golf 1.6NA 5spd

Reply #7November 19, 2008, 03:22:27 am

dillenger1

  • Veteran

  • Offline
  • ***

  • 777
3" exhaust on 1.6 n/a
« Reply #7 on: November 19, 2008, 03:22:27 am »
he just needs a turbo on that exhaust!
Cummins 4bta- 85 dodge prospector short bed
28 mpg!!and i can pull down a house!
1.6td in toyota pickup
10mm head ,t3 intercooled.

Reply #8November 19, 2008, 03:55:33 am

maxfax

  • Veteran

  • Offline
  • ***

  • 2126
3" exhaust on 1.6 n/a
« Reply #8 on: November 19, 2008, 03:55:33 am »
Quote from: "Smokey Eddy"
If they actually do why doesn't everyone have one and why don't cars come from the factory with them?


Exactly!!!!  Good scam for Joe the street racer and his rice burner... Now that his Civic drove through a Pep Boys and every accessory in the store stuck to his car he needs more power to move all that junk. Yet he can't even afford the $200 made in China Turbo because he blew his cash on foot shaped gas pedals and Yosemite Sam (Back Off!) mud flaps..  Of course he really needs some extra power to save his rep cause he got his a$$ kicked when he tried redlight racing a 1.5 N/A Rabbit.. Thus the market for electric superchargers has been born..

Reply #9November 19, 2008, 04:33:16 am

theman53

  • Global Moderator
  • Veteran

  • Offline
  • ***

  • 7835
  • Personal Text
    Holmes County Ohio - North Central Ohio
3" exhaust on 1.6 n/a
« Reply #9 on: November 19, 2008, 04:33:16 am »
Great job.If you run that 3" pipe out the back or side it will be surprisingly quiet inside the car, but outside it is a different story.

 I ran 2.5" on my old flat red rabbit with nothing for a while and when I added the last peice to get out the back it wasn't too bad while driving. The local cop ended up pulling me over after a month of driving through town at 5:39am to get to work and said I had 2 days to fix it. I put the cheapest cherry bomb on there and that was it the rest of the time I owned it.

Reply #10November 19, 2008, 04:48:14 am

foxracer1

  • Authorized Vendor
  • Veteran

  • Offline
  • ***

  • 991
3" exhaust on 1.6 n/a
« Reply #10 on: November 19, 2008, 04:48:14 am »
he cut the flat piece of aluminum out of the way of the ports at the top of the manifold.
84 4dr Rabbit 1.6 N/A sold to friend
86 Jetta TD getting raced out AHU 02A
98 Jetta TDI Malone tune stg 3
91 S10 305 TPI T56
86 S10 2WD Prerunner project.


Now offering turbo rebuilds. HP or stock. Any turbo you have i can rebuild it for ya.
Reseal injection pumps PM for det

Reply #11November 19, 2008, 06:18:06 am

gigaz2

  • Veteran

  • Offline
  • ***

  • 626
3" exhaust on 1.6 n/a
« Reply #11 on: November 19, 2008, 06:18:06 am »
its not a scam, its a huge scam :D
but it would work on some engines.
the problem is airflow, these puny units can't deliver enough for a normal engine.

by my calculations I would need at least four (bigger than those shown) for my gas 1.4L 73hp clio...
that would be to produce about 0,1Bar of boost and it would take almost 80Amps out of the battery and alternator.

soo.. SCAM!!!
________________________________________
do NOT follow my advices or opinions!!! you are warned!

Reply #12November 19, 2008, 08:44:35 am

blkboostedtruck

  • Veteran

  • Offline
  • ***

  • 1535
3" exhaust on 1.6 n/a
« Reply #12 on: November 19, 2008, 08:44:35 am »
i would like to hear from someone that actually bought one?
Duane
injector rebuilds call  414-840-1395 for faster service not on line much!
'66 variant 1500S
'81 2dr n/a 1.6 diesel rabbit 8"lift 260K R.I.P.
'81 caddy gas 1.8 turbo/stroker W/N.O.S.
'81 caddy 1.9 turbo diesel
'82 caddy gas 1.8 G60
 3 jettas '82' '04 '14TDI
+1 rabbit,03 HD sc.eag. duece,46,&5

Reply #13November 19, 2008, 09:50:29 am

blueattack

  • Newbie

  • Offline
  • *

  • 13
3" exhaust on 1.6 n/a
« Reply #13 on: November 19, 2008, 09:50:29 am »
I ordered one , not the cheep one from the USA, one with some better specs, costs around 200 dollars,  from germany

it will arrive next week and I'll try it one my brothers car (opel 1.2 gasser engine)

Reply #14November 19, 2008, 02:57:01 pm

79rabbit4dr

  • Guest
3" exhaust on 1.6 n/a
« Reply #14 on: November 19, 2008, 02:57:01 pm »
Quote from: "blueattack"
I ordered one , not the cheep one from the USA, one with some better specs, costs around 200 dollars,  from germany


keep us posted!