Author Topic: SB/RA pump on place of JR? (Read 3569 times)

carrizog60 · « **on:** August 19, 2007, 02:28:19 pm »

hello

any complications on replacing a 9mm JR pump with a 10mm SB one?

zaprzal · « **Reply #1 on:** August 19, 2007, 11:13:41 pm »

Quote from: "carrizog60"

hello

any complications on replacing a 9mm JR pump with a 10mm SB one?

SB is 9mm

carrizog60 · « **Reply #2 on:** August 19, 2007, 11:49:46 pm »

whell, in the bosch number the 6 digit is a 0, so i suposed it was 10mm :idea:

zaprzal · « **Reply #3 on:** August 20, 2007, 02:07:18 am »

can you post full number here?

I had SB pump and it was 9mm. I changed plunger for 10mm tdi one.

Audi80 · « **Reply #4 on:** August 20, 2007, 02:27:52 am »

Are you sure you got the Bosch number? Correct number for SB pump is 0 460 494 252.

carrizog60 · « **Reply #5 on:** August 20, 2007, 03:14:36 am »

whell i got to ask hevendor again fora photo.

but its plug and play right?

Audi80 · « **Reply #6 on:** August 20, 2007, 03:23:55 am »

Quote from: "carrizog60"

but its plug and play right?

Yes it is.

zaprzal · « **Reply #7 on:** August 20, 2007, 04:47:50 am »

Quote from: "carrizog60"

whell i got to ask hevendor again fora photo.

but its plug and play right?

yes, but you won't gain anything if you already have JR pump

carrizog60 · « **Reply #8 on:** August 20, 2007, 06:02:13 am »

so whats new in the SB pump that the made her substitute the JR unit?

carrizog60 · « **Reply #9 on:** August 21, 2007, 11:31:49 pm »

the codes on the pump:

0 460 494 267
R328-5BT 4001
068 130 110 B
011 263 119816

so if the first number is bosch then is 9mm... :oops:
but it ends on 267 and not in 252 like audi80 said.

ayone know the diferences to the JR pumps?

zaprzal · « **Reply #10 on:** August 21, 2007, 11:52:42 pm »

Quote from: "carrizog60"

the codes on the pump:

0 460 494 267
R328-5BT 4001
068 130 110 B
011 263 119816

so if the first number is bosch then is 9mm... :oops:
but it ends on 267 and not in 252 like audi80 said.

ayone know the diferences to the JR pumps?

I don't know what are differences but I think you won't gain any power.
If I was you I would look for tdi 10mm head, and higher lift camplate from 1.9td aaz (not every aaz have this camplate)

carrizog60 · « **Reply #11 on:** August 22, 2007, 02:47:38 am »

well, its a rebuilt pump...
mine has +350.000 km on it without being open so it was time for it.

Author Topic: SB/RA pump on place of JR? (Read 3569 times)

Audi80

Audi80