WTB power steering bracket & pulleys

[MarkMac]

Swapping a AAZ into an old Willy's. The engine I have has A/C. I understand there is a PS and Alternator setup that uses a V belt. Would be interested in the parts required to convert.

[masterbeavis]

Swapping a AAZ into an old Willy's. The engine I have has A/C. I understand there is a PS and Alternator setup that uses a V belt. Would be interested in the parts required to convert.

There are two generations I’m aware of that have what you need. Do you have a compressor you’re married to? 

I have an AC setup that was removed from from a 91 Jetta 1.6 turbo diesel with factory AC that utilized Vee belts, and a Sanden 5 piston compressor. I think I have a York setup from a Quantum too, but I can’t guarantee I have all of the parts.

[fatmobile]

Would that be the same as the ones on the MK2s?
I believe there was a small pully stuck to the waterpump pully, the belt went from crank to power steering then waterpump.
Do you have the crank pully setup for 2 v-belts?

[masterbeavis]

Would that be the same as the ones on the MK2s?
I believe there was a small pully stuck to the waterpump pully, the belt went from crank to power steering then waterpump.
Do you have the crank pully setup for 2 v-belts?

The setup I have was bone stock MK2. IRC the crank drove the water pump, AC and alternator, the water pump drove the power steering.  It’s been a minute since I’ve pulled it all off, I’ll need to think about it again later and get pics of another car with the identical setup.

[MarkMac]

I am not married to a compressor, I want to eliminate the AC. If you have a v belt solution, that would be great. Let me know, thanks.

[fatmobile]

The MK2 AC delete is pretty easy,.. using the stock bracket, alternator and even the same AC belt.
 It's around here somewhere.
 
 I'm pretty sure the power steering ran off a second, smaller diameter pully.
Both pullys cast into the stock harmonic balancer.

  I'm also pretty sure I have all the brackets and pullys.
 All except the harmonic balancer pullys which I won't part with because I need them for non-power steering cars.

 It'll be a week, but I'll take a look in the pully pile and the bracket bucket,.. and get some pics.

[fatmobile]

Hey I found them.
 powersteeringbrackets by vwfatmobile, on Flickr

That little pully goes on top of the water pump pully.
 I know you don't want the pump. Might even be easier to see the rest of the brackets if it wasn't in the picture.

Only a few bolts and a crank pully left to make it complete.

[ORCoaster]

Glad you found em.  And it looks like it goes well with crackers, grapes and MMMMMMM BACON!

[fatmobile]

 Ah, you caught my subliminal sales trick.
 Put a picture of bacon in the background, ha.
Some cool whip and chicken in a biskit doesn't hurt either.

That's funny, I hadn't noticed I did that,... but will continue to do it from now on because that bracket looks delicious and the pully looks hot.

[ORCoaster]

Crackers and Beer, Note the Bud Light and Coors there on the right!

[fatmobile]

It worked!
 Sent it the other day.
 He even bought the pump.
 Can I supersize that for ya?
 ha.