Fixmyvw.com
« previous next »
Pages: [1]

Author Topic: Feeler: 93 Passat parts  (Read 4247 times)

May 29, 2011, 11:56:19 pm

Wayland

  • Veteran
  • Offline
  • ***
  • 364
Feeler: 93 Passat parts
« on: May 29, 2011, 11:56:19 pm »
I'm thinking of pulling the AAZ out of my 93 Passat and putting it in my Kubvan, and if I go ahead with this, most of the other parts will be available, possibly including the following parts, which all ahve about 14,000km on them: Early TDI style harmonic balancer, clutched alt.pulley (with working alt), rad, hoses, clutch slave, rear struts, brake parts, etc. Also have 02A trans, etc. Car is currently complete and running. If I go ahead with the part out it will be early this summer. Let me know if interested in any parts.
Logged


84 Grumman Olsen Kubvan
93 Dodge CTD Truck
Reply #1May 30, 2011, 06:39:47 am

CRSMP5

  • Guest
Re: Feeler: 93 Passat parts
« Reply #1 on: May 30, 2011, 06:39:47 am »
another kubvan....

you will want to use the 02a in it.. life is much easier..

now i want pics of yours... mine is the burnt toast thread in the tdi section..
Logged
Reply #2May 30, 2011, 11:58:43 am

Big Daddy Roth

  • Veteran
  • Offline
  • ***
  • 298
Re: Feeler: 93 Passat parts
« Reply #2 on: May 30, 2011, 11:58:43 am »
I'd like some bits from the car when you're done. I can come up there and get 'em. I'm in Victoria.
Logged
1993 TD B3 Sedan
1992 G60 Syncro B3 Sedan
Reply #3May 30, 2011, 12:13:05 pm

Wayland

  • Veteran
  • Offline
  • ***
  • 364
Re: Feeler: 93 Passat parts
« Reply #3 on: May 30, 2011, 12:13:05 pm »
Sounds good. I'll let you know when I start parting out.
Logged
84 Grumman Olsen Kubvan
93 Dodge CTD Truck
Reply #4June 20, 2011, 12:46:15 am

Big Daddy Roth

  • Veteran
  • Offline
  • ***
  • 298
Re: Feeler: 93 Passat parts
« Reply #4 on: June 20, 2011, 12:46:15 am »
Have you decided to pull the engine out?
Logged
1993 TD B3 Sedan
1992 G60 Syncro B3 Sedan
Reply #5June 20, 2011, 01:01:45 am

Wayland

  • Veteran
  • Offline
  • ***
  • 364
Re: Feeler: 93 Passat parts
« Reply #5 on: June 20, 2011, 01:01:45 am »
Yes, I will be pulling the motor and parting the car out as soon as I get time. What parts are you looking for?
Logged
84 Grumman Olsen Kubvan
93 Dodge CTD Truck
Reply #6June 20, 2011, 08:58:50 am

VW_Commuter

  • Veteran
  • Offline
  • ***
  • 355
Re: Feeler: 93 Passat parts
« Reply #6 on: June 20, 2011, 08:58:50 am »
If it has cruise control I would be interested in the vacuum servos and mounting parts.
Logged
Greg

'06 Golf TDI traded in for a '12 Jeep Rubicon (the Phatbox is available)
'91 Jetta TD, a work in progress (I'll do a build thread when I start in earnest)
'65 Notchback, a project not yet started
Reply #7June 20, 2011, 11:50:20 am

Big Daddy Roth

  • Veteran
  • Offline
  • ***
  • 298
Re: Feeler: 93 Passat parts
« Reply #7 on: June 20, 2011, 11:50:20 am »
Quote from: VW_Commuter on June 20, 2011, 08:58:50 am
If it has cruise control I would be interested in the vacuum servos and mounting parts.

exact same as a 16V/vr6
Logged
1993 TD B3 Sedan
1992 G60 Syncro B3 Sedan
Reply #8June 20, 2011, 04:58:26 pm

Wayland

  • Veteran
  • Offline
  • ***
  • 364
Re: Feeler: 93 Passat parts
« Reply #8 on: June 20, 2011, 04:58:26 pm »
Quote from: VW_Commuter on June 20, 2011, 08:58:50 am
If it has cruise control I would be interested in the vacuum servos and mounting parts.

It does have working cruise control. Hopefully I'll get a chance to start on the car later this week. Will keep you posted.
Logged
84 Grumman Olsen Kubvan
93 Dodge CTD Truck
Reply #9June 20, 2011, 08:34:02 pm

VW_Commuter

  • Veteran
  • Offline
  • ***
  • 355
Re: Feeler: 93 Passat parts
« Reply #9 on: June 20, 2011, 08:34:02 pm »
Yeah, my Jetta 1.6TD has an AAZ serpentine conversion and the vacuum servo bracket won't fit with the conversion so I need the B3 servo assembly that goes under the dash.
Logged
Greg

'06 Golf TDI traded in for a '12 Jeep Rubicon (the Phatbox is available)
'91 Jetta TD, a work in progress (I'll do a build thread when I start in earnest)
'65 Notchback, a project not yet started
Reply #10October 04, 2011, 10:57:29 pm

Wayland

  • Veteran
  • Offline
  • ***
  • 364
Re: Feeler: 93 Passat parts
« Reply #10 on: October 04, 2011, 10:57:29 pm »
OK, I've been slowly whittling away at this part out all summer. Motor is now in my Kubvan (huge improvement) but I still have some parts for sale. Would prefer local pickup, but willing to ship smaller parts via mail or Greyhound. Here's a link to my ad if interested:

http://www.usedpqb.com/classified-ad/Parting-out-1993-Vw-Passat-Diesel_15893000?preview=insert&new=true
Logged
84 Grumman Olsen Kubvan
93 Dodge CTD Truck
Reply #11November 10, 2011, 08:59:49 pm

Wayland

  • Veteran
  • Offline
  • ***
  • 364
Re: Feeler: 93 Passat parts
« Reply #11 on: November 10, 2011, 08:59:49 pm »
Still have parts for sale if anyone is interested. Please follow link to my ad. Thanks.
Logged
84 Grumman Olsen Kubvan
93 Dodge CTD Truck
Pages: [1]
« previous next »