Author Topic: WTB One 1.6td injector top piece (Read 4346 times)

Smokey Eddy · « **on:** October 28, 2008, 12:10:57 pm »

My little excess fuel nobs broke off two of my injectors. so i can keep one of them JB'd but I'd really like a top for the other one so i dont need an elaborate array of hoses linking them together.
If anyone happens to have an extra top (for what ever reason) please PM me!

blkboostedtruck · « **Reply #1 on:** October 28, 2008, 12:20:45 pm »

you need the part # off yours there are different tops made!
Duane

Smokey Eddy · « **Reply #2 on:** October 28, 2008, 12:26:48 pm »

kinda hard to see but this is the order of crap i can read on it....

(F) ACA 30 s 36/4 068130201P
FRANCE (937) 950 155 bar

that's going left to right around the stop piece.

The brackets mean there is a circle around the number.

Smokey Eddy · « **Reply #3 on:** November 20, 2008, 08:53:52 pm »

bump?

ilikevwdiesel · « **Reply #4 on:** November 21, 2008, 03:01:37 am »

you should be able to use any body section just make sure it's set to 155 bar.

saurkraut · « **Reply #5 on:** November 24, 2008, 06:29:40 am »

If you swap anything, the injector will probably need to be recalibrated.

Smokey Eddy · « **Reply #6 on:** November 24, 2008, 12:43:29 pm »

Quote from: "saurkraut"

If you swap anything, the injector will probably need to be recalibrated.

better than buying a new injector. :roll:

saurkraut · « **Reply #7 on:** November 25, 2008, 06:02:42 am »

Quote from: "Smokey Eddy"

Quote from: "saurkraut"
If you swap anything, the injector will probably need to be recalibrated.

better than buying a new injector. :roll:

New 1.6TD injectors don't exist.

zukgod1 · « **Reply #8 on:** November 25, 2008, 07:03:11 am »

Ya just ask Tyler if he has a core then put your guts in it and have it calibrated the same as the others.