Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - burn_your_money

Pages: [1] 2 3 4 5 ... 22
IDI Engine / MOVED: Mon premier TD
« on: November 18, 2018, 08:27:06 pm »

Parts for Sale/Wanted / Wanted: AAZ camshaft
« on: September 17, 2018, 06:06:35 pm »
Title says it all. I have a USA address as well if needed.

Parts for Sale/Wanted / FS 11mm VE pump head and camplate
« on: July 24, 2018, 10:45:28 am »
I have 2 available. Both are 11mm heads. Camplate is included. I have other parts too if needed.

$150 US + shipping

Parts for Sale/Wanted / WTB 6BT cummins pump bracket
« on: April 20, 2018, 03:34:15 am »
Maybe the 4BT is the same.

I need the bracket at is around the delivery valves. I think it holds the throttle cable?

Anyone have one?

Parts for Sale/Wanted / FS NOS 1.6TD pump
« on: January 29, 2018, 12:35:49 pm »

This pump has never had diesel run through it. Due to it's age, I removed the timing covers to make sure that the insides weren't gummed up from sitting. The insides showed no signs of corrosion and actually still had calibration fluid in it. There was slight gumming or staining from the calibration fluid. I tried moving the advance piston and it does move but it feels a bit stiff. It may just be where the pump is in it's rotation though. The pump is missing the stop solenoid and associated pieces and also a spring and some clips from the advance lever. I'm not able to turn the driveshaft over because I don't have the correct pulley.
Due to the age of the pump, it's possible that it will need to be resealed. I did replace both advance cover seals.
As best I can tell, this is off an Audi 80. Is bolt on for a VW 1.6TD with the exception of the throttle cable. All you would need to do is swap the ball joint from your pump to this one and it would be bolt on.
Asking $300 US

Parts for Sale/Wanted / Parting ALH engine
« on: June 18, 2017, 05:17:50 pm »
2 engines available for parts. Both running well. One auto, one 5 speed.

Pump 10mm $200, pump 11mm $300 - both leak
Head $150
Turbo $100
Injectors $100
Alternator, starter $50

Anything else just ask.

Parts for Sale/Wanted / FS: Lots of automotive/diesel books
« on: December 26, 2016, 01:40:40 am »
I'm clearing off the bookshelf. I may regret this but such is life. Buyer to pay actual shipping from N3A2N8. Discounts if you buy multiples. Prices are CAD

I'm just using Google pictures for now. I'll try and get actual pictures later

Diesel Engines - Third Edition - Like new, never read. Slight nick in corner of cover $20

Diesel Fuel Systems - Autographed by the author - Good used condition (has rebuilding and torque specs for VE pumps and others) $20 SOLD

Popular Mechanics Motor Car Care Guide VW Rabbit - Good shape, tear in cover. $10

Chilton's Volkswagen 1970-1981 - Good shape, crease on cover. Oil prints on edge of book $5

Chilton's Volkswagen 1949-1971 - Good shape, $5

Four-Stroke Performance Tuning - Like new, I bought it new and only flipped through it - $40

Clymer Volkswagen 1961-1976 - Good shape, damage to top left corner, name and address written inside front cover - $20

1984 Ford Truck Shop Manual A, B, C and HT - The Bentley Manual of Ford - All in good shape, some creases on some of the covers - $60

1984 Light Truck Specification Book Ford - Good shape, top right corner of cover is separating a bit - $10

Diesel Engine Operations - Ford - Service Technician Specialty Training - Good shape - $15

Rear axle Diagnosis Ford - Good shape, bottom right corner bent, stain on bottom right first page corner - $10

Pocket Mechanic Volkswagen Diesel/Turbo Diesel 1.6&1.9 from 1984 - Like new - $15 SOLD

Fix your Volkswagen - Good shape - $15

The Procedure Handbook of Arc Welding 12th Edition Lincoln Electric - Good shape, some scuff marks on edge - $15

General Shop Work - 1940 shop practices, very informative, lots of old school "lost" knowledge - Good shape, signature in front cover - $15

Haynes VW Rabbit, Jetta, Scirocco, Pick-up 1974-1985 - Good shape, few minor stains on edges - $5

Haynes VW Rabbit, Jetta, Scirocco, Pick-up 1974-1981- Ok shape, few stains on edges including some diesel oil - $5

Haynes Ford Pickups & Bronco 1980-1990 - Good shape, very light stains on edge - $5

Parts for Sale/Wanted / FS New MK2 TD oil pan
« on: July 18, 2016, 04:45:32 pm »
I have a brand new MK2 TD oil pan for sale. Made by Vaico in Italy. $100 CAD + shipping.

Clearing out the shed, I think this is the last of it! Click pictures for full size. If you want more pictures just ask.

Turbo diesel conversion kit: $300 SOLD It's obviously missing some pieces but it's the bulk of what you need. This K03 would be perfect for someone looking to just add a bit more power without bothering to upgrade to a TD pump. Fast spool up so there should be minimal or no smoke. It will do fine (better) if you have a TD pump though. Turbo has some shaft play but it's in good, usable shape.

1.6 OR 1.9 TD intake manifold
AAZ K03 exhaust manifold
AAZ K03 with drain line
1.6 or 1.9 TD oil feed line. Or I have a custom flexible feed line for an extra $10
MK2 Rear mount
K03 intake hose
K03 boost hose
3x Turbo bolts

Misc pieces

AAZ intake manifold - $60

1.9 oil feed lines - $20 each

k03 boost hose - $10

1.6 intake hose - $25

cut off from turbo drain hose - $5 SOLD

Unused FM100 fuel filter assembly $50

MK2 cold start cable - $15

Solid lifter shim kit with bucket depressor - $80 SOLD

1.6 vacuum pump $30

Cut off AAZ downpipe - T3, K24, K14, T2 - $20


Boost - $NLA
Oil - 10
Temp - $10
Fuel - $10
Oil pressure sending unit - $5
Temp sender - $15

Parts for Sale/Wanted / FS AAZ and 1.6NA pump---sold
« on: May 10, 2016, 07:00:16 pm »
These just came up at the local yard.

$125 each. Still on the vehicles. As-is.

Injectors are $60 for 4.

Parts for Sale/Wanted / FS MK2 CE1 Cluster with Tach
« on: May 10, 2016, 06:56:47 pm »
Unfortunately I don't have a vehicle to test this is so it's sold as it. Physically it looks to be in good shape.

It is in KM/H but that's fairly easy to swap over to MPH

$100 OBO

Parts for Sale/Wanted / Ignore. Avoid the temptation to click.
« on: August 11, 2015, 10:40:13 am »
The moment has passed. I will update this thread when I'm going back. It might be a few years away though.

I'm heading to the wreckers on Friday all going well. If you need any parts let me know and I'll pull them for you. I'll inspect them as best I can and won't keep anything that looks questionable. I can't test anything electronic or check mileage. Please only tell me you are interested in parts if you have the money to purchase and will follow through. I have don't have a lot of time at the yard and don't want to pull parts that you won't end up buying.

Cars available:
91 Jetta NA - broke timing belt - no pump/injectors
Multiple AAZs - no pumps, injectors have been exposed to weather
Multiple AHU/1Z - no pumps or injectors or ECUs
Multiple ALH - No pumps or injectors
A BEW - no injectors
A BHW - no injectors

Prices are as follows regardless of what car they come off: (shipping is included. If in the USA, prices are USD, if in Canada, prices are CAD)

Head w/ cam: $240
Turbo: $200 (VNT will be $230 shipped due to larger box required)
Intake manifold: $90
Exhaust manifold: $90
Vacuum pump: $55
Intakes hoses (airbox to turbo): $40
Intake hoses (turbo to intake): $30
Intercooler hoses: $40 each, complete set $140
Intercooler: $110
Fuel hard line set: $45
Cluster/instrument panel: $80

Anything else, just ask.

If you are buying multiple things and I can combine them for shipping I will and give you the difference. Some things can't be combined like a head and a turbo. Due to size/weight, they each need their own box.

Parts for Sale/Wanted / WTB MK1 exhaust manifold 8v
« on: July 26, 2015, 10:47:26 pm »
I'm looking for a mk1 exhaust manifold. Must be from a 8v and if it's not the toilet bowl style with the spring c clip things I'll need the downpipe too.

Price shipped to p1b3v9 North Bay Ontario please. Can be gas or diesel

Parts for Sale/Wanted / FS Giles Pump - 11mm
« on: July 20, 2015, 12:15:37 pm »
Freshly rebuilt 11mm TDI pump. Comes with full 1 year warranty. $675 USD, no core. Can be built for direct bolt in on a AHU/1Z for an additional $100.

Giles needs about 2 weeks to build it once you buy.

I traded Giles work for this pump, feel free to call him with any questions. 905-940-2266. He's not familiar with the pricing on it so don't bother asking him about that.

If you are serious and have the money and would like a different pump built (1.6, AAZ etc) please IM me the details and I'll ask Giles if he'd be willing to do that instead. Payment in full is required before work will begin on the pump.

Pages: [1] 2 3 4 5 ... 22