VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: TemporarilyOffline on August 01, 2007, 08:37:52 am

Title: 1.6/1.9 IDI Engine Dimensions
Post by: TemporarilyOffline on August 01, 2007, 08:37:52 am

Can anybody give me some measurements on the 1.6/1.9IDI engine height, width, depth?

I'm looking to fit an IDI into my car and need to know if its possible.

- Steve

Title: 1.6/1.9 IDI Engine Dimensions
Post by: Vincent Waldon on December 24, 2008, 12:26:57 pm

Christmas bump.... anyone got an engine out at the moment and can measure the approximate locations of the mounts, size of the hole, etc ?

Swapping *in* a diesel is a worthy Christmas cause !!


(http://i197.photobucket.com/albums/aa85/vwaldon/santa_van.jpg)

Title: 1.6/1.9 IDI Engine Dimensions
Post by: madmedix on December 24, 2008, 12:32:32 pm

As a matter of fact, I have a 1.6TD sitting on an engine stand right now....in the back shed...over 100 ft away and the snow is just over 3 ft deep. However, it just started raining and we'll see...

Title: 1.6/1.9 IDI Engine Dimensions
Post by: cyrus #1 on December 24, 2008, 01:12:40 pm

I'm heading out right now but should be able to nab some dimensions off of my 1.6 later today.  :)

Title: 1.6/1.9 IDI Engine Dimensions
Post by: burn_your_money on December 24, 2008, 01:34:37 pm

I happen to have a 1.6 and a 1.9 sitting in the shop behind me. I'll be back in 5 with some numbers

roughly, 24" high, 24" wide and 20" long. That's without the turbo, which would be about another 3" wide

The 1.9 is about an inch taller

Title: 1.6/1.9 IDI Engine Dimensions
Post by: MJF on December 24, 2008, 01:37:37 pm

http://www.haywood-sullivan.com/vanagon/TDI/tdi_engine_cad_drawing_small.pdf

1,6 block is 16mm lower IIRC

Title: 1.6/1.9 IDI Engine Dimensions
Post by: Vincent Waldon on December 24, 2008, 02:17:45 pm

Thanks all.. the OP emailed me and I knew I could count on youse guys... sniff!!!! :cry:  :lol:

Title: 1.6/1.9 IDI Engine Dimensions
Post by: Vincent Waldon on December 24, 2008, 02:26:09 pm

Quote from: "MJF"

http://www.haywood-sullivan.com/vanagon/TDI/tdi_engine_cad_drawing_small.pdf

1,6 block is 16mm lower IIRC

Very cool, btw... bookmarked with thanks !!