VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Billysgoat on July 16, 2007, 06:45:36 pm

Title: Need Headstuds ASAP!!
Post by: Billysgoat on July 16, 2007, 06:45:36 pm

Got in touch with headbolts.com, they are out of stock on stud kits for the 1.6  :shock:  metal HG gasket etc will be arriving shortly and I really don't want to go back with bolts.

Does anyone have the part # for the ARP's? Alternate brand or vendor who has them??



Alternately, if I wind up going back with bolts, can I remove and replace the bolts with studs when they come available? This is what I plan to do with my Cummins when I stud it, no clue if this is workable on this motor or not.

Thanks!

Title: Need Headstuds ASAP!!
Post by: Fisher on July 16, 2007, 09:35:13 pm

ARP 251-4701

Title: Need Headstuds ASAP!!
Post by: Dr. Diesel on July 17, 2007, 06:14:51 am

i'll have a set of new ARP studs up for grabs in a couple weeks.

Title: Need Headstuds ASAP!!
Post by: Billysgoat on July 17, 2007, 07:55:19 am

Fisher> Thank You!!!


Dr. Diesel> I have the head off right now and hope to have it back on before the end of the week, hence the hurry. Do appreciate the offer.

Title: Need Headstuds ASAP!!
Post by: jimfoo on July 17, 2007, 08:21:34 am

Summit Racing. Also in the ARP instructions, they talk about swapping studs out with bolts one at a time, so I'm sure that would be fine. Just make sure to follow ARP's torque recommendations, and don't use VW's.

Title: Need Headstuds ASAP!!
Post by: Billysgoat on July 17, 2007, 08:35:16 am

Quote

Summit Racing. Also in the ARP instructions, they talk about swapping studs out with bolts one at a time, so I'm sure that would be fine. Just make sure to follow ARP's torque recommendations, and don't use VW's.

Just, and I mean just! Got through ordering a set from Summit.

That was my next question, what final torque to go to, and in what stages?

Not unfamiliar with the process atall, just wondering what has been found to work the best with the 1.6.


BTW, jimfoo, I'm drooling over the rover  8)

Title: Need Headstuds ASAP!!
Post by: jimfoo on July 17, 2007, 09:31:27 am

Instructions come with them. I am pretty sure final torque is 80 ft/lbs if you use their supplied moly lube, 120 with 10W30.
Yeah, Rover & VW Diesel, the best of both worlds.  :wink: Now if I can only stop driving it long enough to finish it.  :lol:

Title: Re: Need Headstuds ASAP!!
Post by: zukgod1 on July 17, 2007, 11:42:14 am

Quote from: "Billysgoat"

Got in touch with headbolts.com, they are out of stock on stud kits for the 1.6  :shock:  metal HG gasket etc will be arriving shortly and I really don't want to go back with bolts.

Does anyone have the part # for the ARP's? Alternate brand or vendor who has them??



Alternately, if I wind up going back with bolts, can I remove and replace the bolts with studs when they come available? This is what I plan to do with my Cummins when I stud it, no clue if this is workable on this motor or not.

Thanks!

Slow the hell down there boy!!!

I just got my block back lastnight, looks good.

WTH you need studs for anyway? this isnt a Cummins dude..  :lol:


dan

Title: Re: Need Headstuds ASAP!!
Post by: Billysgoat on July 17, 2007, 03:31:32 pm

Quote from: "zukgod1"

Quote from: "Billysgoat"

Got in touch with headbolts.com, they are out of stock on stud kits for the 1.6  :shock:  metal HG gasket etc will be arriving shortly and I really don't want to go back with bolts.

Does anyone have the part # for the ARP's? Alternate brand or vendor who has them??



Alternately, if I wind up going back with bolts, can I remove and replace the bolts with studs when they come available? This is what I plan to do with my Cummins when I stud it, no clue if this is workable on this motor or not.

Thanks!

Slow the hell down there boy!!!

I just got my block back lastnight, looks good.

WTH you need studs for anyway? this isnt a Cummins dude..  :lol:


dan

So what brand of headbolt are you gonna use with your motor Dan??  :lol:  

Gotta love modding this little dude, set of studs for under $150 with shipping.

Title: Need Headstuds ASAP!!
Post by: Black Smokin' Diesel on July 17, 2007, 03:34:18 pm

Quote from: "jimfoo"

Also in the ARP instructions, they talk about swapping studs out with bolts one at a time, so I'm sure that would be fine.

Ugh am I the only one who would be a bit anxious after such operation?

Title: Re: Need Headstuds ASAP!!
Post by: zukgod1 on July 18, 2007, 08:52:43 am

Quote from: "Billysgoat"

Quote from: "zukgod1"

Quote from: "Billysgoat"

Got in touch with headbolts.com, they are out of stock on stud kits for the 1.6  :shock:  metal HG gasket etc will be arriving shortly and I really don't want to go back with bolts.

Does anyone have the part # for the ARP's? Alternate brand or vendor who has them??



Alternately, if I wind up going back with bolts, can I remove and replace the bolts with studs when they come available? This is what I plan to do with my Cummins when I stud it, no clue if this is workable on this motor or not.

Thanks!

Slow the hell down there boy!!!

I just got my block back lastnight, looks good.

WTH you need studs for anyway? this isnt a Cummins dude..  :lol:


dan

So what brand of headbolt are you gonna use with your motor Dan??  :lol:  

Gotta love modding this little dude, set of studs for under $150 with shipping.

I'll be going with the ARP studs also.

I dont see why you couldnt replace one at a time like we would on our Cummins Billy.

Side note; I wend to start assembeling the bottom end and realised there wasnt any rings int he dang box with the pistons.... Now I gotta wait more..

dan

Title: Need Headstuds ASAP!!
Post by: Billysgoat on July 18, 2007, 06:56:02 pm

Poor Dan  :lol:  :lol:

I hope to have the IP back from getting checked out by Friday, so this weekend I should get the truck back up and going.

BSD> It's done all the time with the Cummins, buuuuutt..the Cummins has a reusable head gasket. I don't know if the 1.9 metal HG is reusable or not, but in my case it shouldn't matter since studs will be here tomorrow   :twisted:

Title: Need Headstuds ASAP!!
Post by: zukgod1 on July 19, 2007, 05:11:17 pm

Quote from: "Billysgoat"

Poor Dan  :lol:  :lol:
 shouldn't matter since studs will be here tomorrow   :twisted:

 :evil:


dan