VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: glichter1 on July 14, 2007, 12:33:52 am

Title: Need 1.6 l TD piston/rods
Post by: glichter1 on July 14, 2007, 12:33:52 am

need standard 76.5 mm TD pistons/rods set of 4- jumped timing took out half the motor, not sure if i can use N/A rods, i have my old N/a motor but read somewhere that the pin clearance on the TD  rods was greater?

Title: Re: Need 1.6 l TD piston/rods
Post by: Peter on July 23, 2007, 08:34:49 am

Quote from: "glichter1"

need standard 76.5 mm TD pistons/rods set of 4- jumped timing took out half the motor, not sure if i can use N/A rods, i have my old N/a motor but read somewhere that the pin clearance on the TD  rods was greater?

..I have a bottom  end 1.6TD for sale sitting in the garage..perhaps more importantly, where do you live?? I am around the Port Huron Michigan/Sarnia Ont area

Title: Need 1.6 l TD piston/rods
Post by: Patrick on July 24, 2007, 03:12:58 am

And I'm about an hour from him. Others are scattered around too, so where are you?

Title: Need 1.6 l TD piston/rods
Post by: Peter on July 24, 2007, 06:48:51 am

Quote from: "Patrick"

And I'm about an hour from him. Others are scattered around too, so where are you?

... Sarnia

Title: Need 1.6 l TD piston/rods
Post by: burn_your_money on July 24, 2007, 08:42:41 pm

Well that's just handy. You should add that to your profile, I won't bother with what I have

Title: Need 1.6 l TD piston/rods
Post by: Peter on July 25, 2007, 04:03:30 am

Quote from: "burn_your_money"

Well that's just handy. You should add that to your profile, I won't bother with what I have

Done