VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: the4ork on July 09, 2007, 11:54:01 am
-
how involved is this? im assuming you'd use 1.9 accessories? what about aba acessories?
-
I have heard the 1.9 stuff should bolt up, the ABA won't work because of injection pump mounting issues.
Garry
-
3 of the 4 bolts line up for the bracket, there is no hole in the block for the fourth one. I doubt it's needed. I'll be doing this swap in a few weeks
-
3 of the 4 bolts line up for the bracket, there is no hole in the block for the fourth one. I doubt it's needed. I'll be doing this swap in a few weeks
From what I can see on etka, (I've did a bit of looking)... it seems that the 1.9TD and the 2.0L ABA tensioner brackets are different...
I could be wrong tho... but it just looks different..I cant remember what specifically...
-
anyone got a spare 1.9 accessory setup?
-
Yeah I do. What all do you want from it?
-
full serp setup including a/c comp, alt...
-
I don't have AC, sorry
-
you dern canadians and your non-ac setups... the compressor can just be added in with a longer belt like on the aba correct?
-
on a friends '93 vw passat, his serp belt runs the a/c, and alternator only. wp and ps runs off of a v-belt.
kind of a weird setup imo, but hey if your serp belt goes, no worries! :lol:
(http://zsimports.com/Mechanical/Picture%20126.jpg)
not trying to advertise their stuff or anything, but it is relevant..
http://zsimports.com/Mechanical/hardware.htm $429.99 isn't too bad either considering you get a new alternator! but from what the pic shows, you will need either a mk3 a/c comp, or find the clutched pulley which might be $$$
-
There are 2 styles of non-ac, one where the serp drives the WP, one where it doesn't. I have both in my garage right now. The PS is driven by a v-belt though.
Actually maybe I should check out that second one, maybe the AC was just deleted
-
i dont have power steering in my jetta, but i'd lke to have that the waterpump serp drive setup
-
I'll throw together a DIY with some PNs when I get to that stage. If I get the time I might mock it up on a spare block today
BTW don't bother IMing me about the setup, there's already a lineup :lol:
-
I made a DIY
http://vwdiesel.net/phpBB/viewtopic.php?t=9599
-
that lineup is me right? i already inquired about it :wink:
-
lol yeah you're in the line
-
I have had one of those accessory brackets snap on a 1.9 with all the bolts holding arnt you worried about this hapening with one of the main mounting bolts missing?
-
How did it snap? Did the alt sieze up or something?