VWDiesel.net The IDI, TDI, and mTDI source.

General Information => Troubleshooting => Topic started by: bevboyy on June 22, 2007, 08:15:57 am

Title: Joint Flange question
Post by: bevboyy on June 22, 2007, 08:15:57 am

I have a EQ 3 speed auto trans w/90mm Joint flanges. The target car is a 92 Jetta gas with 3 speed auto w/100mm axles and joint flanges. Can I use the 100mm flanges on the EQ trans?

Title: Joint Flange question
Post by: burn_your_money on June 22, 2007, 08:25:10 am

If you swap flanges on the tranny you should be fine

Title: Joint Flange question
Post by: bevboyy on June 22, 2007, 10:30:53 am

Thanks Tyler, that's what I thought. I'll do the axle swap as well. Do it now before I drop the engine in...