VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: funkaholik on April 19, 2007, 01:40:00 pm

Title: 1.6TD date code & clutch info
Post by: funkaholik on April 19, 2007, 01:40:00 pm

Hi,

I just picked up a 1.6TD to swap into my caddy, as my 1.6 NA finally quit.  Is there a date code on the block that will tell me the year of this motor?  Anyone know where it would be located and how to decode it?

Does anyone know a good place to buy a new clutch?  Motor is stock (for now) so I don't need anything too serious, just a good clutch at a good price.  Any info? I looked around in the vendors section but didn't see anything.

Also, as long as the flywheel is off, is there an advantage to having it lightened on a stock motor?  If so, what would be a good weight?

Thanks!

Title: 1.6TD date code & clutch info
Post by: burn_your_money on April 19, 2007, 09:26:24 pm

There is a stamp on the front of the head by the coolant manifold.

Ask around at local shops for stock ones. I found a VW shop and was able to get a clutch kit for about half the prcice of everyone else.

Title: 1.6TD date code & clutch info
Post by: funkaholik on April 20, 2007, 01:48:43 am

Thanks b_y_m.  I went out and looked at the head and there's this crazy clock on there, but I'm not sure what it means.  Does the outer ring mean it was made Jan 23, 1987?  What about the second ring (0-9), and the 11 in the center?  

Anyone?

(http://i104.photobucket.com/albums/m197/funkaholik/VEG%20TRK/TDcastingnumber.jpg)

Title: 1.6TD date code & clutch info
Post by: BellCityDubber on April 20, 2007, 08:47:47 pm

Quote from: "funkaholik"

(http://i104.photobucket.com/albums/m197/funkaholik/VEG%20TRK/TDcastingnumber.jpg)

Wow... I've been looking for an answer for telling the date of a cylinder head for a while now

http://vwdiesel.net/phpBB/viewtopic.php?t=6854&postdays=0&postorder=asc&start=15

Quote from: "jtanguay"

Quote from: "janb"

rumor has it... if it is a hyd head, it is ok to use for TD or NA, and is of the same alloy.

the prechambers and valves had different materials pre '86

i think that rumour is true...  i just checked ETKA, and ME MF RA SB all have the same head :P valves and camshaft included.

this is great info because i just bought a parts car with a nice rebuilt head... ohhh yea!!!

Well, I've taken a picture of mine.. it says 88
according to the info up top with what janb and jtanguay said, this head would be interchangeable with a TD would it not?

here's a pic of the casting on the head
(http://i5.photobucket.com/albums/y187/philbert411/SSPX0081.jpg)

Title: 1.6TD date code & clutch info
Post by: funkaholik on April 23, 2007, 02:14:46 pm

Bump : Does anyone know how to decode the "clock" stamp on the head?

Thanks!!

Title: 1.6TD date code & clutch info
Post by: bvolks73 on April 26, 2007, 06:49:07 am

I'm wondering the same thing. The head on my car now that I have to replace has a different symbol there. The numbers from top to bottom are 23 11 8.
(http://images.thesamba.com/vw/gallery/pix/346855.jpg)