VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: flapjack on April 18, 2007, 09:20:15 pm

Title: K14 Downpipe flange drawing
Post by: flapjack on April 18, 2007, 09:20:15 pm

I'm making a downpipe for my K14
Here is the flange drawing for transition to 2 1/2" od
I haven't machined the ID, just flame cut it, and it looks to fit pretty good.

Do other KKK turbos have the same flange?
If you want the cad file (.dwg or .dxf) It'll be up soon

(http://smellslikefries.com/drawings/K14%20DOWNPIPE%20FLANGE%202%20POINT%205%20TUBING.GIF)

Title: K14 Downpipe flange drawing
Post by: smity_77 on October 31, 2007, 03:19:06 pm

if you could send the .dwg file to me that would be awesome
smity_77 @ Hotmail . com, How did you come up with these numbers?

Title: K14 Downpipe flange drawing
Post by: flapjack on October 31, 2007, 07:01:10 pm

i picked the numbers at random :)
i cut & drilled the flange but didn;t get around to machining & installing, drawing a downpipe . . .which was the goal of the whole thing to begin with
i'll email you the cad as soon as i find it

Title: K14 Downpipe flange drawing
Post by: Baxter on November 01, 2007, 01:09:48 pm

Could I have it too please.
 8)

Title: K14 Downpipe flange drawing
Post by: MK2 GTD on November 01, 2007, 03:52:12 pm

Me too please, i have use of a full Aircraft engineering workshop with  CNC machine  :)

Title: K14 Downpipe flange drawing
Post by: flapjack on November 02, 2007, 12:34:27 am

ok here it is

http://smellslikefries.com/drawings/K14%202%20AND%20A%20HALF%20DOWNPIPE%20FLANGE.DWG

check it before you use it, I never used it !