VWDiesel.net The IDI, TDI, and mTDI source.
For Sale/Looking For => Parts for Sale/Wanted => Topic started by: NOTORIOUS VR on March 29, 2007, 03:06:23 pm
-
Alright... selling for a friend some 1.6L TD parts.
- Modified Diesel Pump (w/ LDA) Govenor and fueling mods done - SOLD
- 1.6L Cams - $50
- Block w/ crank, pistons, conrods, oil/vacuum pump, etc... all in great shape, approx 250k - $170
NEW ITEM RACEWARE HEADSTUDS (used) - $160
- Intake Manifold w/ disabled BOV (holds 28 psi no problem) - $50
- 1.6L Head, in good shape, but has a crack on the outside of one of the injector bungs, can be welded no problem, and motor still runs with this head on it. Can also be repaired for you by request - $170
-TD Cluster w/ 16V speedo (260km/h), and tach! One wire connector, everything works, and is in perfect condition! - SOLD
-TD Cluster w/o tach, everything works, one wire connector. - SOLD
(http://img65.imageshack.us/img65/224/1000977mediumqs1.jpg)
-4S Tranny, mint, no grinds. - $160
-Alternator Bosch remanufactured (used) - $45
Also have 1.9L TDI parts:
Exhaust Manifold with K03-005 turbo - $160
All parts are located in Brampton, ON Canada
Prices are in CND funds and are OBO, but no low balls please.
Buyer pays shipping
Cash and Paypal accepted
Contact Info:
Email: notorious _ vr [at] gmail (dot) com
PM is ok too.
-
Was the pump rebuilt of just toyed with?
-
Pump was not rebuilt... it is in perfect working condition, and was just opened to be modified.
No leaks at all.
It's currently still on the car and running.
-
- Block w/ crank, pistons, conrods, oil/vacuum pump, etc... all in great shape, approx 250k - $200
- Intake Manifold w/ disabled BOV (holds 28 psi no problem) - $75
Why the heck are all the deals in Canada?
I need a block inthe states.....
dan
-
Why the heck are all the deals in Canada?
I need a block inthe states.....
dan
They are relatively plentiful here. Too bad shipping is so expensive; I've shipped turbos and IPs as far as california, but a block would cost a fortune.
-
$700 is the cheapest I've found for shipping a block to Utah, mind you I did get a quote from the same company and it was only $300 to ship a complete engine :?
Luckily shipping a head is only like $50 in shipping
-
I know we could get it here for less than $700.00. Heck I have carriers comming across the border all the time. They are usually full however.
dan
-
bump!
-
bump!!! NEW PRICES, EVERYTHING UPDATED!
-
would you sell the TD cluster w/tach for 50 us dallars ? the tach is the only part i can use ! i live in the states and we drive by MPH so the metric speedo has no value to me! thanks Duane
-
What's the ratio printed on the bottom of that TD cluster's tach? 970, or 975? Something different?
I might have use for the Km/hr speedometer from that turbo cluster, if it's the right ratio. Converting a car to km/hr, since I can do the conversion in my head without much problem and the single-unit speedometers seem so much cleaner in my opinion.
-
Interested in the IP. I'll send a PM.
-
would you sell the TD cluster w/tach for 50 us dallars ? the tach is the only part i can use ! i live in the states and we drive by MPH so the metric speedo has no value to me! thanks Duane
No sorry... $50 is not enough
-
What's the ratio printed on the bottom of that TD cluster's tach? 970, or 975? Something different?
I might have use for the Km/hr speedometer from that turbo cluster, if it's the right ratio. Converting a car to km/hr, since I can do the conversion in my head without much problem and the single-unit speedometers seem so much cleaner in my opinion.
The ratio on the bottom of the speedo is 950.
-
The ratio on the bottom of the speedo is 950.
Ah, nevermind then. I already have two 950 ratio metric speedometers. Keeping my eye out for a 1060 ratio... since once converted that should coincide with my 1707 Syncro speedometer.
Oh, and just a tip, if you click the "Disable HTML in this post" option checkbox, quotes will work properly. Just in case you didn't know.
-
PM sent on the IP. Is it still installed in a car, or out? I am just wondering if I got it if I would need to order the seals for the throttle (is it leaking there on the new Ultra Low sulfur fuel?).
-
ok then this is my second offer and final! 100 bucks shipped for the cluster w/tach? let me know? thanks Duane
-
ok then this is my second offer and final! 100 bucks shipped for the cluster w/tach? let me know? thanks Duane
I'll ask my buddy and get back to you.
-
can you give me a shipping quote on the short block
( Block w/ crank, pistons, conrods, oil/vacuum pump )
shipped to 28206
thanks so much
ryan
-
can you give me a shipping quote on the short block
( Block w/ crank, pistons, conrods, oil/vacuum pump )
shipped to 28206
thanks so much
ryan
I'll tell u it won't be cheap, shipping, broker fees, taxes, etc, etc.. but i'll see what I can find out.
-
I think you will be looking in the $150-200 range if you go UPS before brokeage and import fees which are collected when it is delivered
-
BUMP! UPDATED!
To the guy who wants the block... I'm still working on that quote for you...
-
check your paypal NOTORIOUS VR, i sent the payment last week for the 16v speedometer/w diesel tach I havent heard back from you let me know whats going on? thanks Duane
-
check your paypal NOTORIOUS VR, i sent the payment last week for the 16v speedometer/w diesel tach I havent heard back from you let me know whats going on? thanks Duane
I sent you the PM with the error a few hours before you posted this...
everything has been taken care of and the package will be leaving within the next business day.
-
updated! ttt!