VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: dittohead on March 17, 2007, 07:47:12 pm

Title: 1.6 na crank pulley and poss. injector pump wanted
Post by: dittohead on March 17, 2007, 07:47:12 pm

I need a crank pulley for my 1986 1.6 na diesel jetta.  A local VW wrecker says there is two different ones that year, and the only part left of mine is the mounting flange, so i have no part #  If someone has one they can spare, it would be very much appreciated.  


I also would like to grt my hands on a known good injector pump for the same car.  You can PM me or email [email protected]  Im located on Vancouver Island B.C.

Thanks

Title: 1.6 na crank pulley and poss. injector pump wanted
Post by: duffer on March 17, 2007, 11:23:02 pm

Are you referring to the crank gear
  (sometimes calles a toothed pulley)
  or the alternator/water pump pulley?

  If you need the crank gear, you can
  get one, new, from Python Parts
  part #5010-63374 for $18.04 (Cdn).

  If your referring to the alternator pulley,
  contact burn_your_money on this forum
  he may have one.

  He seems to have a lot of things (and,
  occasionally, stuff) for Mk2 Diesels.

Title: 1.6 na crank pulley and poss. injector pump wanted
Post by: jtanguay on March 18, 2007, 04:34:07 am

the only difference in 86 was half way through they switched to a hydraulic lifter engine.  

did they really change pulley's when changing to hydro???

Title: 1.6 na crank pulley and poss. injector pump wanted
Post by: dittohead on March 18, 2007, 07:22:45 pm

Sorry, im looking for the crank pulley that the alt. belt rides on, NOT the crank gear for the timing belt.  I doubt the pulleys would be different, but i dont know for sure.  All i know is that the local "experts" have dragged this on long enough(2 weeks), and i need to get this car going.

Title: 1.6 na crank pulley and poss. injector pump wanted
Post by: houseofdiesel on March 20, 2007, 07:28:58 am

There are two different types, with AC or without. The AC crank pulleys have a rubber ring in them and much bigger/heavier, the non ac pulleys are just simple steel. You need the right one in order for the vbelts to line up right. I should have both, find out which one you need.
Greg

Title: 1.6 na crank pulley and poss. injector pump wanted
Post by: dittohead on March 20, 2007, 07:46:39 am

Mine has no A/C or PS.  Just a plain single groove pulley.