VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: addautomotive on February 15, 2007, 06:26:10 am

Title: FS: 1.6 TD bits
Post by: addautomotive on February 15, 2007, 06:26:10 am: I'm still trying to make room in my garage. All prices are US$ "OBO", will be shipped monday.

I had some shipping screw-ups last time around, so PLEASE send me your full name, address and phone number if you are buy anything. I HATE sending parts to "screen" names.

-1.6 TD oil filter flange $30 sold![/i]
-1.6TD conrods $50sold![/i]
-1.6TD crank $75 (add conrods for $25)
-1.6TD oil pan $30sold![/i]
-1.6TD steel coolant line $20
-1.6TD oil pump $20

-1.6 TD 0.50 over pistons $100. sold![/i] About these pistons: They do show some scuffing, and look like they are a bit "burnt" just below the precups. The pictures show this pretty clearly... I've posted the worst pics, not the best (this ain't ebay ;) )
They are not perfect, hence the price, but I have certainly used worse. In fact, if they don't sell I WILL use them in my samurai. If you buy the pistons, I'll throw in the conrods for $25 as long as someone else hasn't bought them.

Bunch of miscellaneous stuff... Make an offer:
-IP brackets(see pictures)
-PS & alternator brackets(see pictures)
-front & rear cover plates(see pictures)
-engine mounts
-vacuum pump

As always, I do my very best to describe parts accurately. However, if you aren't happy I will gladly return your money. If there are shipping screw-ups or delays, I generally refund the money until you get the part. This is a hobby, not a business, so I really just want everyone involved to be happy.
Title: FS: 1.6 TD bits
Post by: addautomotive on February 15, 2007, 06:35:39 am: Pistons:
(http://www.jakepalmeristheman.com/uploaded_images/piston2.jpg-768497.jpg)
(http://www.jakepalmeristheman.com/uploaded_images/piston3.jpg-786852.JPG)
(http://www.jakepalmeristheman.com/uploaded_images/piston.jpg-747025.jpg)
(http://www.jakepalmeristheman.com/uploaded_images/pistons.jpg-728148.jpg)

crank:
(http://www.jakepalmeristheman.com/uploaded_images/crank-706998.jpg)

IP brackets: 1.9(early) & 1.6
(http://www.jakepalmeristheman.com/uploaded_images/brackets-762772.jpg)

Power steering & alt mount: I believe these are from a non-AC car... maybe someone could have a look and confirm
(http://www.jakepalmeristheman.com/uploaded_images/brackets2-781967.jpg)
(http://www.jakepalmeristheman.com/uploaded_images/accessorymount.jpg-739297.JPG)

Miscellaneous:
(http://www.jakepalmeristheman.com/uploaded_images/plates.jpg-776741.jpg)
(http://www.jakepalmeristheman.com/uploaded_images/stuff3.jpg-752943.jpg)
(http://www.jakepalmeristheman.com/uploaded_images/stuff2.jpg-726923.jpg)
(http://www.jakepalmeristheman.com/uploaded_images/stuff.jpg-706447.jpg)
[/list]
Title: alternator bracket
Post by: fatmobile on February 16, 2007, 12:43:53 am: The alternator brackets look like A2 brackets.
AC or not.. both use the same bracket.
Nice little selection.
Title: FS: 1.6 TD bits
Post by: evilabe on February 20, 2007, 06:07:13 pm: do you have an intermediate shaft pulley that isn't chewed up on the inside(like mine)? This is for a 91 US Eco motor... I'm assuming all of the 1.6td's all use the same pulley???
Thanks
Title: FS: 1.6 TD bits
Post by: addautomotive on March 16, 2007, 05:41:03 am: UPDATE:

A couple items were very late being sent out, my apologies to Calgary Mclean & Darkness_is_spreading. I've PM'd you with tracking #s.

I have another 1.6TD coming in soon, hopefully this weekend. I went out to hear it run last week, and it is SWEET. Probably a better engine than in my Samurai, started right up after sitting for 3 weeks, and no smoke at all. It's a 91 with k24 turbo.
Title: FS: 1.6 TD bits
Post by: Turbinepowered on March 18, 2007, 05:14:15 pm: I'm gonna kick this back up to the top for a bit...

I'm gonna take a stab at making a nice little 1.5 t-diesel. Toward that goal, going to need some parts, and I figure I ought to support a VWDieseler before I support random salvage yard(s).

Happen to have a 1.6TD injection pump coming up in your parts? Also intake manifold, as the Dasher's present one is obviously an NA manifold... Will the 1.6 oil pumps fit in a 1.5 without issue?

Might need the turbo and manifold if someone snipe-bids on flea-bay for VDub_Fun's K03 and manifold... I'd prefer something smaller than a K24, but if that's what you have and it's in the right price range I'll be cool with it. :D

So what's the scoop, good sir?
Title: FS: 1.6 TD bits
Post by: addautomotive on March 19, 2007, 06:14:56 am: Well the guy I'm buying the current engine from hasn't had time to pull it. We had quite a bit of snow on Friday, and he was into the rum on Saturday. I'm hoping he'll have it pulled this week.

Selling the turbo, manifolds & IP as a package would certainly make my life easier. You'd probably want the oil pan & return line too, correct? How's $300 for everything sound?
Title: FS: 1.6 TD bits
Post by: Turbinepowered on March 19, 2007, 05:24:03 pm: Quote from: "addautomotive"
Selling the turbo, manifolds & IP as a package would certainly make my life easier. You'd probably want the oil pan & return line too, correct? How's $300 for everything sound?

Sounds good to me too. When you get the chance, a shipping quote for the lot to 29670 would be very much appreciated and likely necessary. No rush on the parts, I'm headed to Florida for three days to fix a ceiling, so I won't be back around until Friday or so.
Title: FS: 1.6 TD bits
Post by: Kudagra on March 19, 2007, 05:34:58 pm: How much for the peice in the center of this picture...

(http://www.jakepalmeristheman.com/uploaded_images/plates.jpg-776741.jpg)

Ive moved so the new zip code would be 66006.

I bought that oil cooler set up from you a while back.
Title: FS: 1.6 TD bits
Post by: addautomotive on March 19, 2007, 06:37:38 pm: Quote from: "Turbinepowered"

Sounds good to me too. When you get the chance, a shipping quote for the lot to 29670 would be very much appreciated and likely necessary. No rush on the parts, I'm headed to Florida for three days to fix a ceiling, so I won't be back around until Friday or so.

Perfect. I won't be able to give you an exact shipping quote until I have the parts off & weighed. I've gotten pretty good at "guestimating" shipping though, and I'd say you'd be looking at $50-60.

Quote from: "Kudagra"
How much for the peice in the center of this picture...
Ive moved so the new zip code would be 66006.
I bought that oil cooler set up from you a while back.

Tell ya what. It would be $20 for the one piec, or $5 if you take all three. I need to get rid of some of this stuff.
Title: FS: 1.6 TD bits
Post by: Turbinepowered on March 20, 2007, 06:50:24 pm: PM for you, sir.
Title: FS: 1.6 TD bits
Post by: Kudagra on March 21, 2007, 05:29:42 am: Quote

Tell ya what. It would be $20 for the one piec, or $5 if you take all three. I need to get rid of some of this stuff.

uh...Ok...Ill put them with the ones I have that I cant get rid of. How much shipped to 66006?
Title: FS: 1.6 TD bits
Post by: addautomotive on March 21, 2007, 06:45:28 am: I was only being a smartass. You can have it for $5. I'll try to get a quote tonight.

FWIW; I might have another core engine with a blown headgasket. Downside is it's in my samurai :(
Title: FS: 1.6 TD bits
Post by: addautomotive on March 23, 2007, 06:55:09 am: Quote from: "Kudagra"

uh...Ok...Ill put them with the ones I have that I cant get rid of. How much shipped to 66006?

Jeeze, according to the online calculator it will be $18 to ship; the box is quite bulky. I may take it down to the post office and see if there is a different way to send it for cheap
Title: FS: 1.6 TD bits
Post by: Kudagra on March 23, 2007, 10:26:53 am: Quote

Jeeze, according to the online calculator it will be $18 to ship; the box is quite bulky. I may take it down to the post office and see if there is a different way to send it for cheap

Just slap a label on it and ship it without a box. It can be done. How bad can it get bent? Wont have to worry about customes trying to open it.
Title: FS: 1.6 TD bits
Post by: addautomotive on March 23, 2007, 11:07:58 am: We'll do it for the sake of science
Title: FS: 1.6 TD bits
Post by: Kudagra on March 27, 2007, 04:49:13 pm: Quote
We'll do it for the sake of science

Im sorry I forgot this.

how do you want your money?
Title: FS: 1.6 TD bits
Post by: glichter1 on August 01, 2007, 06:26:06 pm: i need the ip bracket to the right, how abot $30
Title: FS: 1.6 TD bits
Post by: addautomotive on August 02, 2007, 05:14:54 am: Quote from: "glichter1"
i need the ip bracket to the right, how abot $30

Wowee I'l have to dig through my pile this weekend. I'm sure I still have it. PM me your zip and I'll see what shipping is.

Kudagra, I'm sorry I totally forgot about those tin plates. You still interested?
Title: FS: 1.6 TD bits
Post by: k5ryannc on August 02, 2007, 02:33:57 pm: do you still have the td crank for sale?
Title: FS: 1.6 TD bits
Post by: addautomotive on August 05, 2007, 09:22:33 am: Quote from: "k5ryannc"
do you still have the td crank for sale?

To be honest I can't remember. I'm having a "garage night" tonight so I'll see what I have out there.
Title: FS: 1.6 TD bits
Post by: rallydiesel on August 07, 2007, 06:03:19 pm: Do you have any K24 oil return lines lying around?