VWDiesel.net The IDI, TDI, and mTDI source.
General Information => General => Topic started by: jettaman8691 on January 30, 2007, 09:27:24 am
-
It came off of an '82 Quantum 1.6L diesel engine. Seems okay, but I just want to check out the internals before putting it on my rebuilt engine. Also thought it wouldn't hurt anything to polish the intake a bit. There is a thin gasket between the turbine housing and the bearing housing. Will high-heat silicone work in place of it, or should I get the gasket?