VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: kuggkrans on January 09, 2007, 02:01:23 am

Title: IP Bearing tolerance
Post by: kuggkrans on January 09, 2007, 02:01:23 am

Does anybody know what tolerance the bearing have on the input shaft?

I have measured hte shaft to 16,9975 mm
and the outer bearing to 17,038 mm
and the inner bearing to 17,030 mm

Title: IP Bearing tolerance
Post by: kuggkrans on January 09, 2007, 06:10:39 am

sorry it should be

I have measured hte shaft to 16,9775 mm
and the outer bearing to 17,038 mm
and the inner bearing to 17,030 mm

Title: tolerance for Drive shaft bushings
Post by: Giles@PerformanceDiesel on January 09, 2007, 07:39:03 pm

hi

the max tolerance for the drive shaft bushings is .15mm as measured
in the side to side where belt pulls.

hope this helps.

we measure it with a special tool and a dial indicator while moving the
shaft back and forth and a handle extension on the DS.

Giles