VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Barry W on January 05, 2007, 09:14:13 pm

Title: Looking for place to buy ARP studs/bolts....
Post by: Barry W on January 05, 2007, 09:14:13 pm

Looking for a company that stocks the ARP bolts or equivalent. I am rebuilding a 1.6L turbo and looking for cylinder head bolts, and possibly con rod bolts.
Also need to know if the 1.8 8V gas stud kits are the same as the 1.6 turbo diesel?

Thanks!

Title: Looking for place to buy ARP studs/bolts....
Post by: 745 turbogreasel on January 05, 2007, 09:32:21 pm

http://www.raceware-fasteners.com/index.htm

Title: Looking for place to buy ARP studs/bolts....
Post by: Barry W on January 05, 2007, 10:39:49 pm

That looks promising. Thanks!

Title: Looking for place to buy ARP studs/bolts....
Post by: hillfolk'r on January 05, 2007, 11:27:49 pm

all the older 8v's should use the same studs(gas or diesel),as long as they are both 12mm to begin with

Title: Looking for place to buy ARP studs/bolts....
Post by: Audi80 on January 06, 2007, 12:38:47 am

I bought my studs from Summit (http://store.summitracing.com/partdetail.asp?part=ARP%2D251%2D4701&N=700+115&autoview=sku) Gas engines use 11mm bolts, those won´t fit.

Title: Looking for place to buy ARP studs/bolts....
Post by: Barry W on January 06, 2007, 12:48:42 am

what other stretch bolts need replacing on a rebuild?

Title: Looking for place to buy ARP studs/bolts....
Post by: vwmike on January 06, 2007, 12:52:42 am

The rod bolts and the head bolts are your biggest concerns.

Title: Looking for place to buy ARP studs/bolts....
Post by: Barry W on January 06, 2007, 01:39:21 pm

Thanks.

Title: Looking for place to buy ARP studs/bolts....
Post by: DA-BRT on January 09, 2007, 01:03:00 am

Are these ARP bolts also Strech bolts? Or can I re use them?

Does anybody knows whichs Rod bolt set I have to get from ARP? It's for a 1.9TD (AAZ) engineblock.

Title: Looking for place to buy ARP studs/bolts....
Post by: Audi80 on January 09, 2007, 01:58:15 am

You can reuse them.

Title: Looking for place to buy ARP studs/bolts....
Post by: DA-BRT on January 09, 2007, 02:27:41 am

That's better!

Title: studs
Post by: fatmobile on January 10, 2007, 12:09:31 am

Quote

I bought my studs from Summit Gas engines use 11mm bolts, those won´t fit.

 Will the 11mm gasser studs fit the 11mm early NA diesel block with the 11mm headbolts.
 I've seen the 11mm blocks with 12point, triplesquare, 11mm, gasser streeatch bolts... so I figure the studs will work.
 If so it would be a nice upgrade for the weaker 11mm diesel headbolts that are too short and put large stress on a small area.