VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: Donny on January 05, 2007, 10:32:29 am
-
I have a 1.6l N/A. Here is the issue:
My hard Injector lines are leaking. I had originally thought it was the rubber ones but that is not the case. So my question is, how much am I gonna pya for them, and where can I get them at a decent price?
I also want to know if there is a ground wire upgrade kit for these cars.
-
sometimes you can get away with just tightening them a bit... don't go nuts on them... happened to me in the summer time. the injector lines were a bit 'moist' and hot starting was a pain...
-
I a problem with injection lines leaking after i reinstalled them....a drop of oil helps!!!
-
They aren't leaking at the fasteners. They are leaking on the main part of the line so I just wanna get em all replaced and get this thing on the road safely.
So a rough estimate of what they cost is appreciated.
-
yea if the actual line is starting to leak.. dont drive it. there is some crazy pressures in those lines!!!
-
Get used injection lines, someone here will sell you a set. New ones are insane.
As for the ground wire, there is only one from battery to block, replace it with 1 awg welding cable. There are no "grounding kits" for old diesels because there aren't any electronics on the engine, so no improvements to be had.
-
I have a set from my 1.9TD. I can sell them to you...send me a IM
-
will those work in my car seeing as it is a 1.6l n/a?