VWDiesel.net The IDI, TDI, and mTDI source.

General Information => General => Topic started by: Justin on December 30, 2006, 01:00:18 pm

Title: drive axles splines on newer axles
Post by: Justin on December 30, 2006, 01:00:18 pm

So I had some axles modified for an Audi TT transmission and now I am using a beetle trans, well the CV joints are different and I was wondering if anyone new if the inner axle splines were the same on the TT axles and the Beetle axles. I assume that they are but I dont want to buy some and then have them not work

thanks for the help.
Later
Justin

Title: drive axles splines on newer axles
Post by: Justin on January 02, 2007, 06:21:45 am

bump,

does anyone have a newer beetle or golf TDI and happen to have the axles out or able to remove one and give me the sizes?

thanks
Justin

Title: .....
Post by: Darkness_is_spreading on January 02, 2007, 09:53:04 am

You really need to check,  the sline count on them,  just order them from a auto shop, and come in with your Beetle CV shaft and compare the Audi TT shaft bring your caliper. Thats the only way I would suggest trying to compare them,  but they will prob be different based on the High end Audi TT, having almost nothing in relation to the Beetle..... IE ( Quattro)