VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: 91 ECO on December 03, 2006, 01:42:03 pm

Title: Injection pump pulley key
Post by: 91 ECO on December 03, 2006, 01:42:03 pm

I have searched and can't find any posts on the size of the woodruff key that keeps the injection pump pulley aligned.  It's the only part that I have misplaced.  Where I live, only specialty shops carry metric sizes.  I'm thinking that it's 3mm wide because the 3/32" is too thin and the 1/8" is too big.  Thanks for your help.  I'm ready to get my Giles pump up and running.

Mark

Title: Injection pump pulley key
Post by: LeeG on December 03, 2006, 10:20:50 pm

I measured one with my el cheapo plastic caliper and got .12 inches which converts to  3.04800 millimeters
    .

Title: Injection pump pulley key
Post by: jtanguay on December 06, 2006, 05:43:49 am

i went to vw owasco... and on etka the woodruff key was around a buck or two...?  cheeeeaap!