VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: zaprzal on November 18, 2006, 03:58:41 am

Title: what turbo for 1.6 td with 10mm pump?
Post by: zaprzal on November 18, 2006, 03:58:41 am
I've got k24 from 1.6 td in garage, what max boost can I run with this turbo on 1.6 td, ported head, 10mm pump,1.9 metal hg, egt gauge, ic, bigger downpipe and freeflow exhaust? Is that turbo good enough or should I look for different one?
Title: what turbo for 1.6 td with 10mm pump?
Post by: Benjamin on November 18, 2006, 04:25:21 am
it all depend how much power you wanna make.
the k24 will give on max boost something like 140hp, if you realy go to the max it should give max150hp.

Do you got pics from the porting?

Greetz, Benjamin
Title: what turbo for 1.6 td with 10mm pump?
Post by: zaprzal on November 18, 2006, 06:10:01 am
Quote
t all depend how much power you wanna make.


as much as I can get from this setup for DAILY USE car

Quote
the k24 will give on max boost something like 140hp


but how much boost can I run with k24?

Quote
Do you got pics from the porting?


porting and putting metal hg will start on monday, next week.

Is it true that garrett t3 would be better than k24?
Title: what turbo for 1.6 td with 10mm pump?
Post by: Benjamin on November 18, 2006, 04:14:05 pm
Quote
as much as I can get from this setup for DAILY USE car


Read the forum  :wink:  the con rods should braek at 400Nm

i think you can get something like 170hp or more out of that 10mm.

Quote
Is it true that garrett t3 would be better than k24?


some say, i dont think its so much difrence, anyway, if you want the max for daily use, i think you can even get a bigger turbo.
i personaly like VNT turbo's, other guys like turbo's like Holset, but i cant say wich is the best.

About your port-job, can you add some fotos on the forum?

Quote
but how much boost can I run with k24?


i think something like 25psi, maybe 30psi, can someone confirm?????????

Greetz, Benjamin
Title: what turbo for 1.6 td with 10mm pump?
Post by: RabbitJockey on November 18, 2006, 05:13:17 pm
there effeciency runs out before 25 pounds,  but it's not like you can't run them any higher than that, blake has ran his to almost 40 psi.  it's really all about how big your balls are and how much you have to lose, if you can't afford to replace it or have it break, then i wouldn't go above 25psi
Title: what turbo for 1.6 td with 10mm pump?
Post by: zaprzal on November 19, 2006, 01:45:19 am
thanks for help, I'll start with 25psi and think about something bigger next year

Quote
i think you can get something like 170hp or more out of that 10mm.


If I could get 130-140hp (at the beginning of course ;) ) I would be very, very happy  :D I've got 95 crank hp at the moment with stock pump, stock downpipe, and garrett T2 at 17psi (fueling not matched to boost)

Quote
About your port-job, can you add some fotos on the forum?


If I only get photos I'll post them but I don't promise that I'll get them

Quote
Read the forum


I read it a lot  :wink:
Title: what turbo for 1.6 td with 10mm pump?
Post by: HP on December 01, 2006, 08:20:41 am
So, you keep us updated with that project of yours.  :)  With photos whenever possible!
Title: what turbo for 1.6 td with 10mm pump?
Post by: zaprzal on December 02, 2006, 03:53:10 am
Only photo I have is 2,20" downpipe before welding:
(http://www.vw.biaman.pl/sprezarkaASZ/_mini-IMG_6875.jpg)
(http://www.vw.biaman.pl/sprezarkaASZ/_mini-IMG_6877.jpg)
Title: what turbo for 1.6 td with 10mm pump?
Post by: zaprzal on December 05, 2006, 01:16:02 am
some more photos:

(http://www.vw.biaman.pl/sprezarkaASZ/_mini-P1000860.JPG)
(http://www.vw.biaman.pl/sprezarkaASZ/_mini-P1000861.JPG)
(http://www.vw.biaman.pl/sprezarkaASZ/_mini-P1000862.JPG)
(http://www.vw.biaman.pl/sprezarkaASZ/_mini-P1000864.JPG)
(http://www.vw.biaman.pl/sprezarkaASZ/_mini-P1000872.JPG)
(http://www.vw.biaman.pl/sprezarkaASZ/_mini-P1000877.JPG)
(http://www.vw.biaman.pl/sprezarkaASZ/_mini-P1000879.JPG)
Title: what turbo for 1.6 td with 10mm pump?
Post by: 745 turbogreasel on December 05, 2006, 03:39:14 am
What is with the flat area opposite the piston releifs?
My pistons don't look like that.
Title: what turbo for 1.6 td with 10mm pump?
Post by: zaprzal on December 05, 2006, 04:11:22 am
How does your pistons looks like?
Title: what turbo for 1.6 td with 10mm pump?
Post by: Audi80 on December 05, 2006, 04:43:48 am
My pistons (http://www.kotinet.com/matti.farm/Audi/Moottori/122-2289_img.jpg) look same too.
Title: what turbo for 1.6 td with 10mm pump?
Post by: zaprzal on December 07, 2006, 04:49:49 am
k24 works  :) I can hit 30psi with stock pump.